Page 2
Edition Notes The COLORband Q4 IP User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the COLORband Q4 IP as of the release date of this edition. Trademarks Chauvet, Chauvet DJ, the Chauvet logo, and COLORband are registered trademarks or trademarks of Chauvet &...
Important installation or configuration information. The product may not function correctly if this information is not used. Useful information. COLORband Q4 IP User Manual Rev. 4...
♦ Set this product on a flammable surface. Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. COLORband Q4 IP User Manual Rev. 4...
Name Power in Display DMX in DMX out Menu buttons Power out Mounting bracket (2x) Bracket adjustment knob (2x) Product Dimensions 39.3 in 998 mm 3.2 in 81 mm 4.1 in 104 mm COLORband Q4 IP User Manual Rev. 4...
3. Setup AC Power The COLORband Q4 IP has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The COLORband Q4 IP may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming.
If you choose a starting address that is too high, you could restrict the access to some of the product’s channels. The COLORband Q4 IP uses up to 22 DMX channels, which defines the highest configurable address as 491. Download the DMX Primer from www.chauvetdj.com...
102 152 Dimmer speed mode 1 (fast) mode 153 203 Dimmer speed mode 2 (medium) 204 255 Dimmer speed mode 3 (slow) Zones for DMX Control Zone 1 Zone 2 Zone 3 Zone 4 COLORband Q4 IP User Manual Rev. 4...
4. Press <ENTER>. Auto Program Speed To adjust the auto program speed on the COLORband Q4 IP, do the following: 1. Press <MENU> repeatedly until S-- shows on the display. 2. Use <UP> or <DOWN> to increase or decrease the program speed, from S. 1–100.
The Master/Slave mode allows a single COLORband Q4 IP product (the “master”) to control the actions of one or more COLORband Q4 IP products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in standalone, while the slave products will be set to operate in Slave mode.
Use the IP Tester from Chauvet Professional to ensure the product has been reassembled correctly by following the information below: Parameters Values Method Positive Test pressure 15 kPa Test duration 60 seconds PASS state leak pressure <0.02 kPa COLORband Q4 IP User Manual Rev. 4...
Convection I/O Connector Channel Range 3-pin XLR 4, 7, 10, 16, or 22 channels Ordering Product Name Item Code UPC Number COLORband Q4 IP 10031864 781462222123 UL 1573 CSA C22.2 No. 166 E113093 COLORband Q4 IP User Manual Rev. 4...
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. COLORband Q4 IP User Manual Rev. 4...
Need help?
Do you have a question about the COLORband Q4 IP and is the answer not in the manual?
Questions and answers