Chauvet DJ COLORband Q4 IP User Manual
Chauvet DJ COLORband Q4 IP User Manual

Chauvet DJ COLORband Q4 IP User Manual

Hide thumbs Also See for COLORband Q4 IP:

Advertisement

Quick Links

User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Chauvet DJ COLORband Q4 IP

  • Page 1 User Manual...
  • Page 2: Table Of Contents

    Automatic Program ......................Auto Program Speed ...................... Static Color Mode......................Custom Color Mixing...................... Dimmer........................... Screen Lock ........................Factory Reset......................... Master/Slave Mode ....................5. Maintenance....................Product Maintenance ....................6. Technical Specifications................Returns ......................Contact Us......................COLORband Q4 IP User Manual Rev. 1...
  • Page 3: Before You Begin

    Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, and COLORband Q4 IP are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
  • Page 4: Safety Notes

    Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Page 2 of 14 COLORband Q4 IP User Manual Rev. 1...
  • Page 5: Introduction

    2. Introduction Product Overview Power Display Power Menu buttons Bracket adjustment Mounting knob (2x) bracket (2x) Product Dimensions 39.3 in 998 mm 3.2 in 81 mm 4.1 in 104 mm COLORband Q4 IP User Manual Rev. 1 Page 3 of 14...
  • Page 6: Setup

    3. Setup AC Power The COLORband Q4 IP has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
  • Page 7: Mounting

    Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The COLORband Q4 IP may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming.
  • Page 8: Operation

    If you choose a starting address that is too high, you could restrict the access to some of the product’s channels. The COLORband Q4 IP uses up to 22 DMX channels, which defines the highest configurable address as 491. Download the DMX Primer from www.chauvetdj.com...
  • Page 9: Dmx Channel Assignments And Values

    Dimmer speed mode off – Dimmer speed mode 102  152 Dimmer speed mode 1 (fast) 153  203 Dimmer speed mode 2 (medium) 204  255 Dimmer speed mode 3 (slow) COLORband Q4 IP User Manual Rev. 1 Page 7 of 14...
  • Page 10 Dimmer speed mode off – Dimmer speed mode 102  152 Dimmer speed mode 1 (fast) 153  203 Dimmer speed mode 2 (medium) 204  255 Dimmer speed mode 3 (slow) Page 8 of 14 COLORband Q4 IP User Manual Rev. 1...
  • Page 11: Configuration (Standalone)

    4. Press <ENTER>. Auto Program Speed To adjust the auto program speed on the COLORband Q4 IP, do the following: 1. Press <MENU> repeatedly until S-- shows on the display. 2. Use <UP> or <DOWN> to increase or decrease the program speed, from S. 1–100.
  • Page 12: Master/Slave Mode

    The Master/Slave mode allows a single COLORband Q4 IP product (the “master”) to control the actions of one or more COLORband Q4 IP products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in standalone, while the slave products will be set to operate in Slave mode.
  • Page 13: Maintenance

    6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. COLORband Q4 IP User Manual Rev. 1 Page 11 of 14...
  • Page 14: Technical Specifications

    Channel Range 3-pin XLR 4, 7, 10, 16, or 22 channels Ordering Product Name Item Code UPC Number COLORband Q4 IP 10031864 781462222123 UL 1573 CSA C22.2 No. 166 E113093 Page 12 of 14 COLORband Q4 IP User Manual Rev. 1...
  • Page 15: Returns

    Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). COLORband Q4 IP User Manual Rev. 1 Page 13 of 14...
  • Page 16: Contact Us

    Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record. Page 14 of 14 COLORband Q4 IP User Manual Rev. 1...

Table of Contents