Celestron Firstscope 80 AZ Instruction Manual page 3

FIRSTSCOPE A Z
45° Erect
Image Diagonal
Eyepiece Goes
Here
Accessory
Adapter
Altitude Slow
Motion Control —
Knob (longer cable)
Azimuth Slow
yf
Motion Control
'
Knob (shorter cable)
Mounting
Rings
Telescope
Optical Tube
Lens Shade
Altazimuth
Mount
Figure 2-1
The Firstscope AZ fully assembled. Use this illustration and others throughout this manual, to famil
iarize yourself with the various parts of your Firstscope AZ telescope.
With the tripod set up, you can adjust the height of the tripod. To do this:
Adjusting the Tripod
Height
1 Loosen the tightening screw on the lower portion of the tripod leg.
2. Slide the center slat of the leg away from the tripod head until at the desired
height.
3. Tighten the screw (completely) to hold the leg firmly in place.
Repeat this process for each tripod leg.
3