Brother DCP-395CN Software User's Manual page 31

Printing
Printing on both sides of the paper
The following steps show how you can print on both sides of the paper using the Print Odd Pages and
Print Even Pages settings.
If you want to print a 10 page document on 5 sheets of paper, you must set the printer driver options to print
all odd-numbered pages in reverse order (page 9, 7, 5, 3, 1) first and then even-numbered pages in normal
order (page 2, 4, 6, 8, 10).
a
In the printer driver, choose the Basic tab and check Reverse Order.
b
Choose the Advanced tab and click Other Print Options.
c
Choose Print Order and check Print Odd Pages.
Click OK.
d
After the machine prints the odd-numbered pages, remove the printed pages from the output paper tray.
Before you go to the next step, make sure the printed pages are dry.
e
Empty the paper tray. Do not add the printed pages to the top of a stack of unprinted paper.
f
Make sure the pages are completely flat before putting them back in the paper tray, with the side to be
printed on (the blank side) face down and the top page first.
Paper orientation
For Portrait
g
In the printer driver, choose the Basic tab and un-check Reverse Order.
h
Choose the Advanced tab and click Other Print Options.
i
Choose Print Order and check Print Even Pages.
Click OK.
j
The machine will print all the even-numbered pages on the other side of the paper.
Guidelines for printing on both sides of the paper
If the paper is thin, it may wrinkle.
If the paper is curled, flatten it and then put it back in the paper tray.
If the paper is not feeding properly, it may be curled. Remove the paper and straighten it.
For Landscape
1
1
1
24