Scanner Utility - Brother DCP-395CN Software User's Manual

Scanning
e
Press and hold down the left mouse button and drag it over the portion you want to scan.
f
If you need advanced settings, click Adjust the quality of the scanned picture (3). You can choose
Brightness, Contrast, Resolution and Picture type from Advanced Properties. Click OK after you
choose settings.
g
Click the Scan button in the Scan dialog box.
The machine starts scanning the document.
This time only the chosen area of the document appears in the PaperPort™ 11SE window (or your
application window).

Scanner Utility

The Scanner Utility is used to configure the WIA scanner driver for resolutions greater than 1200 dpi and for
changing the Maximum Scanning Size setting.
If you want to set Legal size as the default size, check Legal in the Scanner Utility dialog box. You must
restart your PC for the new settings to take effect.
Note
If you scan the document at a resolution of greater than 1200 dpi, the file size may be very large. Make
sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If
you do not have enough memory or hard disk space then your PC may freeze and you could lose your file.
2
2
44