Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Güralp Manuals
  4. Measuring Instruments
  5. Certimus
  6. Quick start manual

Güralp CERTIMUS Quick Start Manual

Medium motion digital seismometer
Hide thumbs Also See for CERTIMUS:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
CERTIMUS
MEDIUM MOTION DIGITAL SEISMOMETER
QUICK START GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the CERTIMUS and is the answer not in the manual?

Questions and answers

Related Manuals for Güralp CERTIMUS

Summary of Contents for Güralp CERTIMUS

  • Page 1 CERTIMUS MEDIUM MOTION DIGITAL SEISMOMETER QUICK START GUIDE...

  • Page 2: Initial Hardware Setup

    Fixed microSD present, no followed by 1s pause removable microSD The LED indicator 3 quick RED flashes followed microSD cards present on the Certimus will by 1s pause missing or poor GPS behave as shown in microSD cards and GPS all GREEN GREEN flash every 4 the table.
  • Page 3 Güralp Discovery Software Güralp Discovery Software Download Güralp Discovery from: https://guralp.com/sw/download-discovery.shtml https://guralp.com/sw/download-discovery.shtml (Please contact support@guralp.com for other operating systems) Run the installer that you have downloaded, follow the on-screen instructions to install and then launch Discovery. If you see a dialogue from Windows Firewall saying that it has “blocked some features of this app”, select...
  • Page 4 Certimus on the main window. The I.P. address shows under the LAN address column as shown below. 2. LCD touch screen If your Certimus has an LCD display, in the main menu select Status. The Status page shows information about the Certimus I.P. address as shown below.
  • Page 5 Configure the Sample Rate The outputs of a Certimus can be streamed and/or saved to the SD cards. Sample rates for both streamed and recorded channels can be configured via the Certimus’ web interface, using the Data Stream and Data Record tabs respectively. The three main seismic channels can be found by selecting Sensor1 from the Display On Page drop-down menu.

  • Page 6: Instrument Status

    View Live Waveform Open the Discovery software and locate your Certimus. Right-click on the Certimus and select Live View then GDI. The Live View window will open and start streaming all available data from the Certimus. Streams can be added or removed from...
  • Page 8 Notes Güralp Systems +44 118 981 9056 MSH-CER-0001 Issue A Limited +44 118 981 9943 Midas House sales@guralp.com Calleva Park Aldermaston Reading RG7 8EA www.guralp.com United Kingdom...