Subscribe to Our Youtube Channel
Related Manuals for Hoshizaki e-Water VDW-2PB-SC-E
Summary of Contents for Hoshizaki e-Water VDW-2PB-SC-E
- Page 1 Operating Manual eWater VDW Auto Handwash System Model N. VDW-2PB-SC-EW Have a Question? Speak to the eWater Support Team Original Equipment knowledge.ewatersystems.com Manufacturer 1300 EWATER...
-
Page 2: [B] Operation Panel
In the context of this manual, the term "sanitizing water" refers to [b] OPERATION PANEL acidic water and "cleaning water" refers to alkaline water. 1. CONSTRUCTION [a] VALVE UNIT (Front) [10] [11] [10] [12] [13] [1] Auto lamp (orange) Comes on in the automatic dispensing mode. [2] Cleaning lamp (blue) Flashes while cleaning water is being dispensed. -
Page 3: Installation
[c] ACCESSORIES [b] AUTOMATIC DISPENSING VALVE Truss head Instruction manual Hose clamp 1) Unscrew and remove the mounting machine screw Quick fitting Quick fitting hose (1 m long) 2 brackets from the bottom of the Truss head machine screw Filter valve. (with plastic washer) Quick joint 2) Use the accessory truss head Mounting bracket... - Page 4 Use the shift buttons to select the desired dispensing mode. The [c] TIMER DISPENSING MODE mode changes every time the left or right shift button is pressed. The valve dispenses cleaning water or sanitizing water, whichever is selected, for a specific time (factory adjustment: 15 seconds). See “5. [a] STANDARD SETTINGS”.
- Page 5 4) Press the dispense/stop button, or hold a hand over the dispense *1 Open/close the solenoid valve opposite to the detecting sensor. *2 Set the sensor response speed. sensor for the desired water. *3 Make the left and right sensors indistinctive. *4 Select the automatic dispensing mode countdown between individual The display starts counting up, and the selected water is dispensed dispensing time for each type of water or total dispensing time.
-
Page 6: Before Calling A Service Agent
Hoshizaki’s liability under the terms of the warranty are limited and shall exclude routine servicing, cleaning, essential maintenance and/ 3) Press the shift button to have the desired code on the display. See or repairs occasioned by misuse and installations not in accordance “[a] STANDARD SETTINGS”.
Need help?
Do you have a question about the e-Water VDW-2PB-SC-E and is the answer not in the manual?
Questions and answers