Subscribe to Our Youtube Channel
Related Manuals for Hoshizaki ROX-10WB3-EW
Summary of Contents for Hoshizaki ROX-10WB3-EW
- Page 1 WATER ELECTROLYZER ROX-10WB3-EW INSTRUCTION MANUAL FOR END USER 3-16 Minamiyakata, Sakae, Toyoake, Aichi 470-1194 Japan L1X003115 (032017)
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, or damage to the unit. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. - Page 3 2. CONSTRUCTION In the context of this manual, the term "sanitizing water" refers to acidic water and "cleaning water" refers to alkaline water. [a] EXTERIOR 1. PRINCIPLE OF ELECTROLYSIS Flow of electrons DC Power Supply [10] Sodium Hydroxide Hypochlorous Acid (HOCl) (NaOH) Electrolytic Cell...
-
Page 4: [B] Operation Panel
[b] OPERATION PANEL [c] CONTROL PANEL [1] Display lamp (red) Indicates the item currently displayed on the operation panel. [2] * Button (down button) When adjusting the settings, press this button to reduce the value. [1] Operation lamp (green) [3] Set button Illuminates while the unit is running. -
Page 5: Water Failure
5. START UP 1) Prepare a plastic bucket. Pull out the cap, salt water hose and filter from the salt 1) Plug in the unit. water tank, and put them into the bucket. 2) Open the water supply line shut-off valve. Salt Water Hose 3) Check for proper operation of the water softener. Refer to the instruction manual provided for operating instructions. -
Page 6: Maintenance
3000 hours of operation. * Check that there is enough salt for refrigeration in the water softener. If the replace cell lamp is flashing, contact an authorized Hoshizaki service company. * For other instructions, follow the instruction manual for the water... -
Page 7: Before Calling A Service Agent
* If the supply cord and/or the plug should need to be replaced, it according to the following instructions. should only be done by a qualified service engineer. If the problem still exists, turn off the power switch (earth leakage circuit breaker), unplug the unit, and contact an authorized Hoshizaki * Check for the following problems: service company. Only qualified personnel may repair the unit. Do not attempt to repair it yourself. - Page 8 “warranty period”. The warranty shall be effective for one year from the date of installation. Hoshizaki’s liability under the terms of the warranty are limited and shall exclude routine servicing, cleaning, essential maintenance and/ or repairs occasioned by misuse and installations not in accordance with Hoshizaki guidelines.
- Page 9 14. INSPECTION SHEET Make copies of this page. [a] DAILY INSPECTION SHEET Date Time Sanitizing water Cleaning water Neutralizer Available chlorine concentration* Salt water level Neutralizing agent level Water hardness Water leaks around unit Water leaks from water circuit Cell run time Checked by * Sanitizing water only Date...
Need help?
Do you have a question about the ROX-10WB3-EW and is the answer not in the manual?
Questions and answers