Introduction; Revision History - iSMA CONTROLLI iSMA-B-FCU User Manual

iSMA-B-FCU Programming User Manual

1 Introduction

This user manual describes programming of the iSMA-B-FCU controller.

1.1 Revision History

Rev.
1.5 19 Jul 2024
1.4 21 Feb 2023
1.3 21 Apr 2022
1.2 27 Jan 2020
1.1 20 Aug 2017
1.0 20 Dec 2016
Date
The reason for the creation of the new version of the
document:
Changes in Document:
First edition
Table 1. Revision history
www.ismacontrolli.com
Description
• Updated iSMA Room Devices Modbus kit components
• Corrections in the iSMA Room Devices Modbus kit
• FP panel references
• Editorial corrections
• Rebranded
• Updated iSMA Room Devices Modbus kit
• Touch Point panel references
• The replaced environment of programming from the
Workplace to iC Tool
• Added description of the iSMA Building kit
• Rebuilt main algorithm of FCU default application (several
components of iSMA_FCU kit rebuilt).
• New functionality added (new components to iSMA_FCU
kit).
• The new way of switching Heating and Cooling Modes by
FCU_HeatingCoolingSwitch component.
• Added: description of FCU_PI component
• Added: description of FCU_PID component
• Added: description of FCU_TemperatureAnalog
component
• Added: description of FCU_TemperatureBinary
component
• Added: description of FCU_ValueHolder component
• Added: description of FCU_WindowStatusSwitch
component
• Added: description of PWM component
• Added: description of Room Device kit
• Added: description of Advance Control kit
DMP243en | 1st Issue rev. 5 | 07/2024 page 5 of 133