Message Editor; Cell Broadcast; Message Settings - Motorola STAC85 Manual

stac85en.bk : opt_menu.fm5 Page 51 Wednesday, January 28, 1998 9:06 AM
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See 'How to Create
and Edit SMS Messages' for more information on using the

Message Editor.

Delete Message
This option will delete the currently viewed message.
Message Editor
The Message Editor is used to edit the currently selected message
and then to either send the modified message or store it in your
Outgoing Messages list. See 'How to Create and Edit SMS
Messages' for more information on using the Message Editor.

Cell Broadcast

This option is used to set the cell broadcast settings. The option
has two settings On or Off.
If you change the setting to On, you will be asked to enter the
channel you wish to receive information from.
Please contact your Cellular Service Provider for a list of available
channels and the information they provide.
While a broadcast message is scrolling across the display you can
stop and start it by pressing *. Press # to restart the
message from the beginning. If you want to remove the message
from the display, press C.
If you need to use * and # for their normal functions
A
while you are receiving a cell broadcast message, you must
first remove the message.

Message Settings

Voicemail Number
This option is used to enter a phone number which will be used
by the 'Call Voicemail' option.
If there is already a Voicemail Number, this will be shown in the
display. This can be used, modified or deleted as desired.
Service Centre
Before you can send any messages you must use this option to
enter your Message Service Centre number. This number is
obtained from your Cellular Service Provider.
Expiry Period
You can use this option to specify the maximum time, in hours,
that your unforwarded messages are to remain with the Message
Service Centre before being deleted. When you select this option,
the current expiry period will be displayed (the default is 24
hours).
The maximum value you can enter is 10584, though the real limit
will depend on your Message Service Centre.
Outgoing Message Type
This option is network dependent and can be used to specify the
format of your outgoing messages. You can select from the
following message types: Text (default), Fax, X400, Paging,
E-Mail, ERMES or Voice.
You do not need to select Voice to send messages to
A
Voicemail boxes.
Using the Options Menu
51 English