I-Tech NETVIEW NVP1017- 801 User Manual page 25

NVP1015 / NVP1017
12. Start Up
KVM Settings Session
1. OSD
2. Scan
3. Change Password
4. Console On/OFF
5. Escape
OSD Menu on screen time
●
default is 10 seconds.
It can be modified from 05 – 99
●
seconds.
Scan interval from one PC port
●
to next PC port when applying
auto scan, its default is 10
seconds.
It can be modified to 99
●
seconds for maximum.
Default password "00000000"
●
8 zeros
Choose "Change Password" in
●
KVM Setting Session.
Key-in the existing password.
●
Enter the New Password.
●
Re-Enter the New Password.
●
Changing Password complete.
●
The steps are shown as next
●
picture:
ON – any user can use the
●
console
OFF – user is not allowed to
●
use the console port, unless
password is entered.
Default – OFF, you need to
●
key-in password.
When the following screen is
●
appeared, you can press
"ESC" key to escape.
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL:
24
info@i-techcompany.com
User Manual
• WEB: www.iTechLCD.com