Bosch HQA 14E 3 Series User Manual And Installation Instructions page 20

Table of Contents

Advertisement

en Shelf supports
Slide the inner pane into the left- and right-hand re-
6.
tainers  ⁠ .
Push the inner pane upwards until it is in the left-
7.
and right-hand retainers  ⁠ .
Shelf supports
15  Shelf supports
To clean the rails and the cooking compartment, or to
replace the rails, you can remove these.
15.1 Detaching the shelf supports
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Lift the rail forwards slightly
1.
Pull the whole rail to the front
2.
Clean the rail.
3.
→ "Cleaning products", Page 15
20
and detach it
⁠ .
and remove it.
Put the door cover into position 
8.
on it until you hear it click into place.
Open the appliance door fully.
9.
Close the locking levers on the left- and right-hand
10.
hinges  ⁠ .
a The locking levers are closed. The appliance door is
secured and cannot be detached.
Close the appliance door.
11.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
15.2 Attaching the shelf supports
Notes
¡ The rails only fit on the right or left.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
First, push the rail into the middle of the rear
1.
socket 
until the rail rests against the cooking
compartment wall, and then push this back
Push the rail into the front socket
2.
also rests against the cooking compartment wall,
and then press this downwards
and push down
⁠ .
until the rail
⁠ .
3
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HQA 14E 3 Series and is the answer not in the manual?

Questions and answers

Table of Contents