Motorola HS830 HANSFREE Manual page 32

2 Press and hold the MFB to place this wireless module into pairing mode.
3 On unit 2, place the A/B switch to position B.
4 Press and hold the MFB to place this wireless module into paring mode.
The two units automatically find each other and pair to each other. Rapid flashes on each
wireless module indicate the two modules have pared successfully.
A full duplex wireless audio channel is established and walkie-talkie mode is enabled.
Walkie-Talkie Mode Tips
Any one of the paired units can turn the audio connection on or off to save power by pressing
the MFB. The Bluetooth connection is maintained.
The two modules will remember this paring even after the second unit switches to position A
and is used with a mobile phone.
Each wireless module can remember up to four paired devices (phones, PDA's, Laptop com-
puters and other wireless modules) when in switch position A.
The wireless module remembers only one other wireless module when in switch position B.