Related Manuals for GRASS VALLEY 8985PRC
Summary of Contents for GRASS VALLEY 8985PRC
- Page 1 8985PRC SD/HD PROCESSING AMPLIFIER Release Notes SOFTWARE VERSION 1.0.2 071866700 SEPTEMBER 2008...
- Page 2 Benelux/Belgium: +32 (0) 2 334 90 30 Benelux/Netherlands: +31 (0) 35 62 38 42 1 N. Europe: +45 45 96 88 70 Germany, Austria, Eastern Europe: +49 6150 104 444 UK, Ireland, Israel: +44 118 923 0499 Copyright © Grass Valley. All rights reserved. This product may be covered by one or more U.S. and foreign patents.
-
Page 3: Table Of Contents
Acquiring 8985PRC Software ........ - Page 4 Contents 8985PRC — Release Notes...
-
Page 5: 8985Prc Hd/Sd Proc Amp Module Release Notes
Module Release Notes Introduction This document provides information on the latest release of the software for use with the 8985PRC HD/SD Proc Amp modules. It describes the soft- ware update from version 1.0.0 to 1.0.2. Note The 8985FSP and 8985FS HD/SD Frame Sync/Proc Amp module software update and operation is covered in separate documentation. -
Page 6: Version 1.0.2 Software Release
• NetConfig, a networking application from Grass Valley, must be used for updating software. Use the latest version of NetConfig (version 2.0.9 as of this printing) available free of charge from the Grass Valley ftp site. • The 8900NET module must be running version 4.3.0 for proper soft- ware updating. -
Page 7: Acquiring 8900Net Software
To download the latest software for the 8985PRC module, do the following: 1. Select the folowing link to the ftp server. ftp://ftp.thomsongrassvalley.com/modular/8900/8985PRC/1.0.2 2. Right-click on all of the 8985PRC .fld and .sw2 files provided to download them to the C:\temp folder or other convenient location on your PC. -
Page 8: Updating Software With Netconfig
After updating software you will need to recall factory defaults. Save your current settings into a user settings file to reload after the software update. 8985PRC Upgrade Procedure Begin the upgrade procedure by moving the 8985PRC files you have down- loaded from the ftp site into the correct NetConfig directories. Note This update requires that factory defaults be recalled after the download is completed. - Page 9 Figure 1. 8985PRC Boot Load 12. Check the 8985PRC module(s) you need to update in the Client Name list on the right. You may update all devices at once by clicking on the button to check all boxes. Or you may only check the...
- Page 10 Boot file to all selected modules. Load 15. Now select the file labeled, under the 8985PRC list App ([SW App 1.0.2]) and check the same Client name checkboxes you updated for the boot code (or use the button f you are updating all modules).
- Page 11 Updating Software With NetConfig Figure 3. Verify Software Update Verify software and boot version 8985PRC — Release Notes...
- Page 12 Version 1.0.2 8985PRC — Release Notes...
Need help?
Do you have a question about the 8985PRC and is the answer not in the manual?
Questions and answers