With The Dolby Pro Logic Surround System - Aiwa XD-DV370 Operating Instructions Manual

CONNECTIONS (CONTINUED)
F Connecting to a TV set and an AV amplifier with the Dolby Pro Logic Surround system
Rear of the unit
When your TV set is equipped with an S-video input terminal, see page 17.
Set the setup menu correctly after connecting!
According to the audio equipment and TV set to which
the unit is connected, set the "Digital Audio Output" and
"TV Aspect" of the setup menu correctly referring to the
following below.
See "CHANGING SETUP VALUE" on page 39 in detail.
Digital Audio Output
DOLBY DIGITAL/PCM
TV Aspect
When your TV set is a conventional-screen size TV:
4:3 Letter box
When your TV set is a wide-screen size TV:
16:9 Wide
16
21 pin scart cable (not supplied)
DIGITAL OUT
COAXIAL
DIGITAL
OUT S-VIDEO
OUT
OPTICAL
white
red
Audio cord (supplied)
Amplifier equipped with
Dolby Pro Logic Surround
Front
speaker (L)
Centre speaker
Surround speaker (L)
to 21 pin scart
connector
AUDIO
OUT
L
R
NTSC
PAL AUTO
VIDEO
OUT
to AUDIO OUT
L (white)/ R (red) jacks
to an audio input jacks
(Left/ white, Right/ red)
Front speaker
(R)
Surround speaker (R)
NOTE
When the picture noise appears while copy-protected DVDs
are played, connect the unit directly to a TV set. Do not connect
through a VCR, TV/VCR or AV selector.
TV set
to an AC power socket
(AC 230 V, 50 Hz)