Connecting to a TV set equipped with S-video jack
Set the setup menu correctly after connecting!
Set the "TV Output Select" and "TV Aspect" of the setup
menu correctly referring to the following below.
See "CHANGING SETUP VALUE" on page 39 in detail.
TV Output Select
S-Video
TV Aspect
When your TV set is a conventional-screen size TV:
4:3 Letterbox
When your TV set is a wide-screen size TV:
16:9 Wide
CAUTION
Do not select "S-Video" when connecting to the TV
set with the 21pin scart cable. Video signals are not
output from the 21pin scart connector of this unit.
Rear of TV set
S-video cord
(not supplied)
DIGITAL OUT
COAXIAL
DIGITAL
S-VIDEO
OUT
OUT
OPTICAL
S-video input connector
(S1, S2)
to S-VIDEO OUT connector
Rear of the unit
AUDIO
OUT
L
R
NTSC
PAL
AUTO
VIDEO
OUT
to an AC power socket
(AC 230 V, 50 Hz)
NOTE
When the picture noise appears while copy-protected DVDs
are played, connect the unit directly to a TV set. Do not
connect through a VCR, TV/VCR or AV selector.
17