A Connecting To A Tv Set Only - Aiwa XD-DV370 Operating Instructions Manual

A Connecting to a TV set only

to 21 pin scart connector
When your TV set is equipped with an S-video input terminal, see page 17.
Set the setup menu correctly after connecting!
According to the audio equipment and TV set to which the
unit is connected, set the "TV Aspect" of the setup menu
correctly referring to the following below.
See "CHANGING SETUP VALUE" on page 39 in detail.
TV Aspect
When your TV set is a conventional-screen size TV:
4:3 Letter box
When your TV set is a wide-screen size TV:
16:9 Wide
21 pin scart cable (not supplied)
DIGITAL OUT
COAXIAL
DIGITAL
OUT S-VIDEO
OUT
OPTICAL
Rear of TV set
21 pin scart connector
AUDIO
OUT
L
R
NTSC
PAL AUTO
VIDEO
OUT
NOTE
When the picture noise appears while copy-protected DVDs
are played, connect the unit directly to a TV set. Do not
connect through a VCR, TV/VCR or AV selector.
Rear of the unit
to an AC power socket
(AC 230 V, 50 Hz)
11