Biostar I915P-A7 User Manual page 9

A. JATXPWR2: ATX power source header.
B. JKBV1: Power source header for JKBMS1.
C. Back panel (rear side) I/O connectors.
D. JCDIN1: CD-ROM audio-in connector.
E. JATXPWR1: ATX power source header.
F. JAUDIOF1: Front panel audio-out header.
G. PCI-Ex1_1~PCI-Ex1_3: PCI EXPRESS x1 slots.
H. JSPDIF_IN1: Digital audio-in connector (optional).
I. J1394PWR1: Power source header for 1394 Firewire port (optional).
J. PCI1~PCI3: Peripheral Component Interconnect slots.
K. JUSB3/JUSB4: Headers for USB 2.0 port at front panel.
L. JUSBV3_1: Power source for JUSB3/JUSB4.
M. J1394A1: Header for 1394 Firewire port at front panel (optional).
N. JSFAN1: Power source header for system fan.
O. JPANEL1: Front panel facilities header.
P.
IDE2/IDE3: Hard disk device connectors (optional).
Q. JSPDOF_OUT1: Digital audio-out connector.
R. SATA1~SATA4: On-board serial ATA connectors.
S. JCL1: Chassis open message header.
T. JCMOS1: Clear CMOS header.
U. PCI-Ex16: PCI EXPRESS x16 slot.
V. IDE1: Hard disk device connector.
W. DDRA1~DDRB2: DDR memory modules.
X. FDD1: Floppy disk device connector.
Y. JCFAN1: Power source header for CPU fan.
Z. JUSBV1: Power source header for J1394_USB1 and JRJ45USB1.
A1. JSFAN2: Power source header for system fan (optional).
I915P-A7
9