Biostar I915P-A7 User Manual page 4

Slots
Three 32bit PCI bus master slots.
Three PCI-Express x1 slots:
Bandwidth 250MB/s per direction; 500MB/s Totally.
-
- PCI Express supports a raw bit-rate of 2.5Gb/s on the data
pins.
2X bandwidth over the traditional PCI architecture.
-
Note:
1. If PCI-Express x1 card is used when installing XP
operation system, Do Not leave PCI-EX1_1 slot in blank.
2. Please always insert your PCI-Express x1 card firstly in
PCI-EX1_1 slot.
3. If you have two PCI-Express x1 cards, please insert them
into <PCI-EX1_1 and PCI-EX1_2 slots> or <PCI-EX1_1
and PCI-EX1 3 slots>.
One PCI-Express x16 slot:
Maximum theoretical realized bandwidth of 4GB/s
-
simultaneously per direction, for an aggregate of 8GB/s
totally.
Super I/O
Chip: ITE IT8712.
Low Pin Count Interface.
Provides the most commonly used legacy Super I/O
functionality.
Environment Control initiatives,
H/W Monitor
-
Fan Speed Controller
-
- ITE's "Smart Guardian" function
LAN
Chip: RTL8100C
Supports 10 Mb/s, and 100 Mb/s auto-negotiation.
Half/Full duplex capability.
Supports ACPI power management.
I915P-A7
4