Biostar I915P-A7 User Manual page 19

JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS
safe setting and the CMOS data, please carefully follow the
procedures to avoid damaging the motherboard.
1
3
Pin 1-2 close
1
3
Pin 2-3 close
※ Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to "Pin 2-3 close".
3. Wait for five seconds.
4. Set the jumper to "Pin 1-2 close".
5. Powers on the AC.
6. Reset your desired password or clear the CMOS data.
I915P-A7
Assignment
Normal Operation (Default).
Clear CMOS data.
19