Chapter 2: Hardware Installation; Central Processing Unit (Cpu) - Biostar I915P-A7 User Manual

CHAPTER 2: HARDWARE INSTALLATION

2.1 C
ENTRAL
Special Notice:
Remove Pin Cap before installation, and make
good preservation for future use. When the CPU
is removed, cover the Pin Cap on the empty
socket to ensure pin legs won't be damaged.
Step 1: Pull the lever sideways away from the socket and then raise the
lever up to a 90-degree angle.
Step 2: Look for the black cut edge on socket, and the white dot on CPU
should point wards this black cut edge. The CPU will fit only in the
correct orientation.
Step 2-1:
I915P-A7
P U (CPU)
ROCESSING NIT
10
Pin Cap