Atlas FAP62T Product Catalog
  1. Manuals
  2. Brands
  3. Atlas Manuals
  4. Speakers
  5. FAP62T
  6. Product catalog

Atlas FAP62T Product Catalog

Strategy series
Hide thumbs Also See for FAP62T:
Table of Contents

Advertisement

Quick Links

See also: Manual
Product Catalog

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FAP62T and is the answer not in the manual?

Questions and answers

Related Manuals for Atlas FAP62T

Summary of Contents for Atlas FAP62T

  • Page 1 Product Catalog...

  • Page 2: Table Of Contents

    Index ................. 118 AA Series Mixer Amplifiers .............. 58 PA Series Amplifiers ................. 59 Atlas Sound makes every effort to avoid errors, however we reserve the right Pole Mount Amplifier ................ 62 to correct typographical, photographic, clerical or printing errors; in addition, Amplifier Accessories ...............
  • Page 3 A History of Atlas Sound The roots of Atlas Sound can be traced through various points in history as well as back to the very origin of the commercial sound industry. During the Warren Harding political campaign of the late 1920's, it became clear the larger crowds would demand better sound reproduction than that offered by the traditional megaphone held in front of the candidate.

  • Page 4: Strategy Series ® Ii Loudspeakers

    • Extended Low Frequency Response Optimally Tuned and Ported Galvanized Steel Enclosures • Easy Installation In Drop Tile or Sheetrock Ceilings Via C-Ring / V-Rail Tile Bridge and "Dog Leg" Mounting System (Included) • Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Includes Bypass Setting for 8 Ω...
  • Page 5 FAP42T(C) FAP42T(C) hole of the FAP42-RR. The extended dog legs are then tightened, drawing the entire assembly fl ush to the ceiling. Strategy Series II "Motor Board" Assemblies ®...
  • Page 6 A unique tap selector switch design allows for easy system tuning. A full selection of taps up to 16 watts as well as an 8 Ω transformer bypass setting is included for maximum system versatility. This switch "knob" also functions as a diffuser cone, providing smooth, even dispersion of the high frequency content from the center of the 4"...
  • Page 7 60 Watt Enhanced Quality 70.7V / 100V Internal Transformer Minimizes Insertion Loss and Maintains Low Frequency • Front Mounted Tap Selector Switch for Easy System Tuning Adjustments (1.9 W – 60 W @ 70.7v Plus 8 Ω Setting) • Unique "Trap Door" Input Section Allows for Through Conduit Runs With Rigid or Flex Conduit •...
  • Page 8 92 dB 1 W / 1 M. An efficient 60 watt multi-tap transformer is integral to the package but may be easily bypassed via the front mount tap selector switch for direct coupled 8 Ω operation.

  • Page 9: Sm Series - Surface Mount Indoor / Outdoor Speakers

    , tuned and ported, deep drawn steel enclosure provides low frequency response down to 45 Hz (±10 dB). A special low saturation 70.7V / 100V transformer is included with 1.9 to 60 watt primary taps (@ 70.7V) to match FAPSUB with Grille and balance the subwoofer with full range speakers without the need for separate amplification.
  • Page 10 Atlas Sound TRX WAVEGUIDE high frequency ™ director. The high frequency section is symmetrical (90˚ H x 90˚ V) for equal coverage in both the horizontal or vertical cabinet mounting positions. SM42T-B...
  • Page 11 ™ frequency director provides outstanding performance with tighter, yet even sound coverage (65˚ H x 65˚ V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the Atlas Sound PolyGuard protection circuit.
  • Page 12 Barrier Strip Input for 70.7V / 100V / 8 Ω or Parallel 4-Pole Speak-On Input for 8 Ω Operation Only ™ • Unique Input Panel Allows Use of Standard 4" Square Box Cover (Raco 753 or Eq.) for Applications Where Flex Conduit is Required for Termination • Fuse Protection for Driver •...
  • Page 13 Input for 8 Ω Operation Only ™ • Unique Input Panel Allows Use of Standard 4" Square Box Cover (Raco 753 or Eq.) for Applications Where Flex Conduit is Required for Termination • Fuse Protection for Low and High Frequency Drivers •...

  • Page 14: Pm Series Pendant Mount Speakers

    ® an extra set of hands. The patented hanger design allows the fixture to be set in place while giving users access to the conductors while wiring is being completed. The Hands-Free Swivel Hanger can support a fixture up to 50 pounds and is ideal for gyms or other commercial sites.

  • Page 15: Strategy Series ® Garden & Landscape Speakers

    70.7V / 100V transformer is terminated to a 24" direct burial rated pigtail that includes conductors for all transformer taps as well as a direct connection for 8 Ω operation. The side firing transducer allows the installer to aim sound at ATS183GS targeted listening areas.

  • Page 16: 8" & 12" Compression Driver Coaxial Speakers

    Both the low frequency driver and the tweeter feature permanently aligned voice coils (1.5" and 1" diameter, respectively) to assure distortion free performance. A factory installed 60 watt variable tap line transformer is included with the package. The transformer can be bypassed easily for 8 Ω applications.

  • Page 17: Strategy Series ® Loudspeakers

    4", 6", ® and 8" sizes enabling owners, architects, contractors, and consultants to meet varying sound system requirements. UL 1480 listed for general signaling (non-fire) when used in combination with UL listed enclosures and baffles. Strategy Series System Components ®...
  • Page 18 1 ⁄ " thick. They may also be installed by conventional screw mounting if desired. Models are offered in 4", 6", and 8" sizes in Extended Low Frequency and Economy versions. Extended Low Frequency FA97 Series...

  • Page 19: 4" & 8" Loudspeaker Drivers

    (both measured from the front of the mounting surface to the rear of the inside mounting area). The FAPR Series FAPR-6 is constructed of 20-gauge CRS and finished in textured black epoxy. It is equipped with four threaded inserts for loudspeaker installation and three stud receptacles for mounting Strategy Series grilles.
  • Page 20 The loudspeaker is matched with a high efficiency 8 watt 70.7V transformer with a maximum insertion loss of 0.6 dB. The primary taps are 1, 2, 4, & 8 watts. Speaker / transformer is fully assembled onto an attractive CRS white powder coated grille (model 62-8) with standard mounting holes to accommodate the majority of Atlas Sound standard 8"...
  • Page 21 Patented EZ Mount assembly is designed for use in standard 2' x 4' lay-in ceiling installations when backboxes are not required. EHD72W has pre-mounted brackets and installs quickly with wingnuts to the support rails provided. Note: EZ Series will not accept an enclosure. For installations that require a backbox, see EZ Mount enclosure system on page 42. EZHD72W HD / FD Series Industry-favorite loudspeaker packages for ceiling installations.

  • Page 22: Dual Voice Coil Loudspeaker

    IS125SYS reproduction. The 1' x 2' footprint allows quick installation into 2' x 2' or 2' x 4' acoustic tile ceilings. The integral tile bridge rail may be repositioned to either side of the unit for maximum installation flexibility. The E.O. Box (with cover) is smartly positioned on the side of the conical enclosure to facilitate rigid or flexible conduit.

  • Page 23: 4" Loudspeaker / Transformer / Baffle Packages

    Note: Model AF140 consists of a single coil autoformer with multiple taps for maximum flexibility in matching a wide variety of loudspeaker loads to power amplifier outputs. A single AF140 will handle loads up to 150 watts and by connecting two units in series, power handling capacity can be increased to 300 watts.

  • Page 24: Vandal Proof Baffle System

    8" diameter loudspeaker with a 10 oz ceramic magnet and pre-assembled 25V / 70.7V transformer with five power taps terminated to a euro block style connector. This connector includes 3 empty blocks to allow through VP14MB & VP14ENC Assembled connection of other devices such as call switches or intercom phones without the need for wire nuts.

  • Page 25: Mtx ® In-Wall & In-Ceiling Speakers

    In-Wall & In-Ceiling Speakers and Powered Subwoofers by MTX Atlas Sound is proud to include a select offering of quality residential speaker products by MTX Audio. MTX Audio and Atlas Sound are both Mitek Corporation companies sharing in technologies and engineering resources. All models include: white aluminum mesh grilles (paintable), stainless steel hardware, push-pin terminals, install-ready pre- assembly, and an industry leading 10 year warranty.

  • Page 26: Mtx Audio Loudspeakers

    MPP4200 Flat Panel Loudspeakers from MTX Audio MPP4200 features dual 4" drivers along with a high output 30 mm Teteron tweeter in a very compact vertical design to complement any flat panel display installation. 100 watts power handling. Mounting bracket is included. Choice of black, white or silver finish.

  • Page 27: A-Bus By Mtx Audio

    ABUS-HUB4X8 has 4 inputs and ABUS-HUB1X4 4 zone outputs available on 8 output ports. Each hub includes an expansion port (IN/OUT) so multiple hubs can be connected to expand the system. A-Bus Powered Wall Mount Volume Controls The MTX Audio ABUS-VC2 volume control power module is specifically designed for use with the ABUS-HUB1X2,...

  • Page 28: Mobile Dj

    It boasts 150 watts RMS power handling and dual frequency ports in order to deliver bass you can feel. This speaker is designed to perform equally well in many different applications, including live sound reproduction, public address, parties, karaoke, or mobile DJ entertainment.

  • Page 29: Apx Series - Constant-Directivity Loudspeaker

    * Measured at Rated Power, 1 Meter (avg) ** Angle shown for -6 dB, 2 kHz Octave Band *** 40 watt Transformer. Power Taps: 25V: .63, 1.25, 2.5, 3.75, 5, 10, 20, 40; 70.7V: 2.5, 10, 20, 30, 40; 100V: 5, 10, 20, 40 "X"-tra Value Features •...

  • Page 30: Ah Series Stadium Loudspeakers

    75 Hz – 14.5 kHz (±5 dB). With an efficiency rating in excess of 102 dB (1 W / 1 M), the 15" AH Series is a perfect choice for high-energy music playback at sporting events and extended range speech reinforcement for large venue emergency notification. The 8 Ω...

  • Page 31: Ah Series Mounting Hardware

    250 watts RMS providing output in excess of 126 dB (Rated power @ 1 Meter). Three eyebolt suspension points are provided along with mounting locations to allow stacked installation of other AH models.

  • Page 32: Professional Omni-Purpose Loudspeakers

    High-effi ciency, 15 watt loudspeakers are designed for recessed installation in sound and alarm system applications. Flange mounting units may be installed fl ush to a panel or recessed into wall or ceiling surfaces. For aesthetic consideration and retrofi t convenience of existing cone loudspeaker installations, models will accept any 6"...

  • Page 33: Indoor / Outdoor Music Loudspeaker

    ** Angle Shown for -6 dB, 2 kHz Octave Band *** 15 watts Transformer Power Taps: 25V: 0.5, 1, 2, 4, 8; 70.7V: 1, 2, 4, 8, 15 **** 30 watts Transformer Power Taps: 25V: 1, 2, 4, 8, 15; 70.7V: 2, 4, 8, 15, 30 Compact, High-Efficiency Loudspeakers...

  • Page 34: Voice Control™ Loudspeakers For Emergency Signaling

    AP-15TUC 1480—Speakers for Fire Protective Signaling Systems and California State Fire Marshal (Title 19). Models with special modifi cations to meet New York City MEA (Calendar no. 57-74-SA) and UL Canada are also available as standard product. Contact factory. Model...

  • Page 35: Cd Series Mid Format Constant Directivity Paging Horns

    The Industry's Only Constant Directivity Re-Entrant Horn CD Series horns from Atlas Sound provide greatly improved uniform sound coverage compared to conical designs. With all models the horizontal coverage pattern is precisely controlled over a frequency range. For mount- ing, the proven CJ46 style heavy-duty steel mounting bracket is utilized with positive lock for horizontal and vertical positioning in single or stacked multi-unit clusters.

  • Page 36: High-Efficiency Compression Driver Units

    Series. Competitively priced compression drivers provide accurate sound reproduction, optimum intelligibility and dependable performance in commercial sound, high-power music and public address loudspeaker systems. Models are equally suited for application with Atlas Sound projector horns or as replacement drivers for use with standard 1 ⁄...

  • Page 37: Transformers & Accessories For Compression Drivers

    Mounting Accessories APBK Replacement Omni-Purpose swivel bracket, gray. ® FAMT-6 Mounting ring/adapter allows a 6" cone or APF Series loudspeaker to mount an 8" enclosure and/or grille. L20-100 Shown with APF-15T and BX-3 APF Series Baffles, Enclosures & Mounting Rings L20-100 Round grille.
  • Page 38 The T620-8 will not accommodate an enclosure when used with the 81-S tile bridge. FA170-4 FAPR-4 FA81-4* FA97-4(NK), FA95-4 FA720-4 FA-TR4** ****** The T620-8 will not work with the T198-8 enclosure when used with the FA730-4 81-S tile bridge. FA51-6 FAPR-6 FA81-6* FA97-6(NK), FA95-6(NK) FA170-6 FA-TR6**...

  • Page 39: Baffle / Enclosure Mounting Guide

    ***** The T620-8 will not accommodate an enclosure when used with the 81-S Series is ideal for use with 95 and 96 Series enclosures and 75 and 76 tile bridge. Series mounting rings for 8" loudspeakers. Note: series will not accept...

  • Page 40: Round Recessed Baffles For 4" & 8" Loudspeakers

    Economical Steel Baffles 51 Series This industry favorite is an aesthetically pleasing and cost-efficient baffle available in standard screw-mount or labor-saving torsion-spring (T) versions. Models for 4" loudspeakers include welded mounting studs. One-piece CRS construction. Textured white epoxy finish. Model...
  • Page 41 4" & 8" loudspeakers. Models have provisions to accommo- date ceiling thicknesses up to 2" deep. All models also feature a flush perforated center section, torsion springs, and concealed loudspeaker mounting studs. Welded CRS assemblies are finished in textured white.

  • Page 42: Square Recessed Baffles

    Contemporary Wall or Ceiling Baffles 161 Series Handsome design and concealed loudspeaker mounting studs present this baffle as an ideal choice for most office interiors. Available in standard screw-mount. Construction is one-piece CRS and includes no leak gasket. Finish is textured white epoxy. Model...

  • Page 43: Surface Baffle / Enclosures

    These wood slope-front baffles are ideal for installations that require the aesthetics of classic enclosure design, particularly classrooms, offices, reception areas, and retail outlets. Offered for use with 8" loudspeakers (sold Separately) and features a baffle / enclosure with walnut grain laminate, black fabric grille, and a 9.5˚ slope for 410-8 directional sound dispersion.

  • Page 44: Vandal-Proof Baffles

    Housings are spun .090 tempered aluminum plate. Loudspeaker grille is cast from special self-aging aluminum VP410-S alloy with a tensile strength of 44,000 P.S.I. Grille is reinforced with a stainless steel wire mesh screen spun over a CRS subplate. Housing and grille are assembled using flush-mount heat-treated alloy screws. Models mount to stan- dard E.O.

  • Page 45: Ez Mount Enclosure System For Suspended Ceilings

    Time and labor-saving enclosure system for 4" and 8" loudspeakers installs quickly and efficiently. Enclosures have premounted brackets and install easily with screws to support rails provided. No costly tile bridge is necessary. Welded CRS enclosures are undercoated and finished in textured black epoxy. Support rails are CRS and finished in a galvanized coating.

  • Page 46: Enclosure System For Difficult Access Ceilings

    flange for installation convenience in acoustic tile ceilings and Model 191-78-8 with adjustable mounting bracket for installation flexibility in a variety of ceiling types and depths. All enclosures are 95-8-10 heavy-gauge CRS furnished with combination conduit knockouts. Recessed models are finished in textured black epoxy.

  • Page 47: Enclosures For High-Performance Loudspeakers

    Construction is 18-gauge CRS with formed strengthening ribs on the enclosure back. Acoustic fiberboard is permanently affixed to the inner wall surfaces of all square enclosures to eliminate hangover and vibration (cylindrical enclosures utilize undercoating). Inner walls are also lined with 1 ⁄...

  • Page 48: Round Protective Enclosures For Recessed Installation

    Furnished with four combination conduit knockouts ⁄ "– ⁄ " (13 mm – 19 mm), flexible perforated strap, and four J-clips. One-piece CRS construction, undercoated, patch- jute lined and finished in textured epoxy. Model Diameter / Opening...

  • Page 49: Square Enclosures

    " (271 mm) ⁄ " (95 mm) * Models with slotted mounting holes will also accept 180 Series support rails to facilitate installation in suspended tile ceilings. Surface Mount Enclosure for 4" Loudspeakers SE198-4 Reference Baffle / Enclosure Mounting Guide for list of compatible grilles.

  • Page 50: Square Enclosures For Recessed Installations

    ") to 191 Series provide installation flexibility in a variety of ceiling types and depths. Series is available in choice of two depths and for standard screw-mount baffle installation. CRS enclosure is furnished with four compound conduit knockouts, heavy undercoating, patch-jute lining and black epoxy finish. For extra-depth see Model 191-78-8 with acoustic fiberglass,...
  • Page 51 Plastic mounting rings are ideal for retrofit applications with hard-to-access ceilings. Model P77-8 may be conveniently installed from ground level by cutting a 12" (305 mm) diameter hole in the ceiling, snapping ring at break- slot, and maneuvering it up through hole to rest above ceiling. Model P78-8 includes mounting ears for conventional installation in 16"...

  • Page 52: Analog Clock / Speaker Baffles And Enclosures

    9", 10", or 12" standard clock (by others). Universal clock mounting bracket is secured via #4 weld studs. To ensure proper fit, the overall diameter of the selected clock must clear the clock / hole clearance diameter listed in the chart below.

  • Page 53: Fire-Rated Speaker Enclosure System

    Q. How can I find out if the Atlas Sound FR Series will be approved in my application? A. Check with the local Fire Marshall or Building Inspector, who will have the final say in the approval of the FR Series Loudspeakers.

  • Page 54: Industry Standard Commercial Attenuators

    25V and 70.7V systems. Attenuation is accomplished in ten steps plus positive off position. (No stop between maximum and off position to prevent switch damage). Contacts are silver plated for noise-free operation. Includes stainless steel plate, stamped and filled dial scale with skirted black knob.

  • Page 55: Atlas Sound Whispertouch ® Volume Controls

    The knob features smooth detents and make-before-break contacts for smooth transition when changing volume settings. Attenuation is accomplished in 10 steps. All models have frequency response of 20 Hz – 20 kHz (-3 dB, +0). Units include an on / off switch and indicator light. An internal "smart" relay switch automatically puts speakers into "stand by"...

  • Page 56: Impedance-Matching Speaker Switching Systems

    ) volume controls such as the DAT8ST. AST devices include separate ® on / off controls for each loudspeaker pair and one A-B source selector switch for overall system control. Units feature a mar-resistant black finish. Dimensions are 17" Width x 1 ⁄...

  • Page 57: Hardware Accessories

    ATPLATE-052 The Atlas Sound AT Plate, a 2 RU 14-gauge plate pre-punched to accommodate up to six Atlas Sound rack mount attenuators. Attractive black filler plugs are provided for applications where the AT Plate will not be fully "loaded". The plate is finished in flat black epoxy to better blend in with other rack mount equipment.

  • Page 58: Replacement Speaker Parts

    SM42 Tweeter Driver Assembly FAP40TDRV SM42 4" Woofer SM42CBRKT-B SM42 C-Bracket - Black SM42CBRKT-W SM42 C-Bracket - White FAPVRAIL V Rail for All FAP Series Models FAPPHX Phoenix Connector for All FAP Series Models FAP40TGRILL FAP40T Grille FAP40TDL FAP40T Dogleg FAP40TDLS...

  • Page 59: Atlas Sound Infrared Repeater System & Devices

    (by others). M-1CB4B M-1AJW* M-1A Note: some high-end A/V components are equipped to accept hard-wired IR signals. In this case, F-1 flashers would not be necessary. *(Shown with cover plate, Sold separately.) Model Description...

  • Page 60: Aa Series Mixer Amplifiers

    Route Any Source Combination or Entire Mix Bus to Zone 2 (MOH Out) • Special Low Cut Filter is 6 dBu / Octave at 400 Hz and Also Bypasses Front Panel Bass Control to Allow use with Paging Horns like...

  • Page 61: Pa Series Amplifiers

    Remote or VOX Mute Capabilities • Zone 2 MOH Out From CH6 Line Source • Special Low Cut Filter is 6 dBu / Octave at 400 Hz and Also Bypasses Front Panel Bass Control to Allow use with Paging Horns Like APX40TN AP-15T •...
  • Page 62 / amplifier on the market today. True 3 zone matrixing (main 120 watt output, 1 watt output and line level output), 24VDC output with relay sync to the mute bus, bridge in / out with built-in relay control, one industry standard module input with direct to mix bus or direct to amp assignment, global or BGM input VCA control and multiple mute bus configuration options round out the unit's extensive feature...
  • Page 63 60 watts of pure power in a compact package with simple rear mounted RCA & Phoenix Inputs and RCA Outputs plus a unique loud- ness contour control which provides just the right amount of bass enhancement for low level listening environments.

  • Page 64: Pole Mount Amplifier

    Atlas Sound provides an innovative solution for display systems that PA702 require local sound reinforcement. Since the first projector was pole mounted in a ceiling, there has been a real quandary about how to best provide local amplification. The PA702 pole mount amplifier is a very elegant solution to solve this issue.
  • Page 65 These transformers were chosen for their outstanding reliability as well as extended frequency response (-3 dB @ 30 Hz - 70.7V output through transformer). Now you can have the peace of mind that systems will have true transformer output isolation, a feature that previously may have not been affordable due to the cost of quality external transformers.

  • Page 66: Amplifier Accessories

    Inserting unit into the signal path between an amplifier's output and the speaker load allows sys- tem muting based upon a variety of external trigger sources including speaker level audio (3V to 45V), line level audio (10mV to 3V), external contact closure or 5 to 24 volts DC.

  • Page 67: Power Supplies / Electronic Accessories

    Assembly is complete with fused-transformer primary, 6' power cord, and black epoxy finish. TS242. UL Listed unit is used for a variety of applications that do not require a regulated supply. Model includes a 117VAC unswitched outlet, neon pilot lamp, barrier-type terminals, and 6' power cord.
  • Page 68 Chassis is available in two sizes with 2 and 4 relay sockets. Plug-in DPDT relays prevent long-term oxidation prob- lems and are offered in 3 and 5 amp versions (order separately). To eliminate bussing, one size of each relay coil is connected to a common terminal.

  • Page 69: Voice / Tone™ Emergency Loudspeakers

    VTF Series also requires Model adapter ring. Models are available with choice of finish Red(R) or Neutral Gray(N). When used with compatible control equipment all models comply with UL Standard 1480 — Speakers for Fire Protective Signaling Systems. VT Series...

  • Page 70: Installation Accessories For Voice / Tone™ Loudspeakers

    Die-cast zinc construction with water sealed driver will withstand moisture, corrosion, vibration, vermin, and vandalism. Models are available with a selection of multi-tap transformers and are designed to mount a variety of standard or custom housings and face plates to meet installation and applica- tion requirements. All VTB Series qualify as a UL 1480 recognized component.

  • Page 71: Emergency Signaling Loudspeakers

    (283 g) ±5 dB Gauss (1 W / 1 M) * UL Ratings measured per UL Standard 1480 at 1 watt, 10 ft. (3 dB increment rating): UHT = 81 dB. Dispersion: 160˚ @ 2 kHz. Model Transformer Transformer DC Blocking...

  • Page 72: Electronic Siren Loudspeakers & Replacement Kits

    120 dBA (mea- sured at 1600 Hz, rated power, 3 meters on axis) and features a directed dispersion range of 80˚ x 105˚ (1 kHz octave band) to assure high-intensity acoustic penetration for electronic siren signals. Unit contains the patented Atlas Sound AS-100N compression driver complete with a non-fatiguing, self-aligning sound chamber assembly.

  • Page 73: Vandal-Proof Intercom Stations

    Switch may also be used as a stand alone signaling device when a separate or remotely located call-origina- tion button is desired. Switch is a SPST normally open circuit with a 3-amp contact rating. Hardware installs using a 6–32 holt-head driver bit for a standard ⁄...

  • Page 74: Visikom Intercommunication System

    Each plug-in module will control up to six isolated telephone circuits for a total system capacity of 24 circuits. Chassis and lift-off cover are constructed of 18-gauge CRS and finished in textured black epoxy. Wiring requirements are two conductor, telephone type. For complete wiring and installation information, see manual #245691 at AtlasSound.com.

  • Page 75: Telephone Intercom Stations & Accessories

    Built-in potentiometer provides optional adjustability for the 25K output level. The 600 Ω input may be matched to 600 Ω, 10K Ω and 25K Ω circuits. All components are mounted on a printed circuit board. Steel chassis includes mounting ears and "insta- mount"...

  • Page 76: Sound Masking Generator / Speaker Processor

    filter sets are available for each of the 4 generator outputs, 8 band parametric EQ blocks along with dynamic control is available for each of the two mic/line inputs. Any mix of all 6 inputs may be easily matrixed to the 4 output DSP blocks for additional parametric equalization, delay, and limiting (if required).
  • Page 77 Dr. Chanaud owns a number of patents and has authored many technical articles on office acoustics and masking sound systems. You can find many of these articles as well as information on Chanaud's soon to be published book on Sound Masking at AtlasSound.com...

  • Page 78: Sound Masking Generators & Equalizer

    -10 dBV equipment. Front panel mounted Low Pass Filter / High Pass Filter and level controls are provided along with a switch for ±6 or ±12 dB operation and 31 sturdy 20 mm filter slide controls.

  • Page 79: Sound Masking Loudspeakers

    fl at for shipping. To meet most any local code requirement, the includes an M1000 innovative cover containing both knockouts and a strain relief. This system will allow the use of rigid of fl exible conduit (if required) and easily accommodates "through" connections on the removable plate. M1000 is fi...

  • Page 80: Fma Series Racks

    "hat" sections for added strength & greater versatility in rack rail positioning. The hat sections include a rack rail slot along with holes spaced the entire length of the hat section to allow for easy, secure positioning of the rack rails. This newly designed hat section is also spaced in the cabinet to allow the installation of standard 19"...
  • Page 81 FMA35-25LRPV FMA44-25LRPV FMA-44-36LRPV Panels Optional Rear Rack FMA-RRK35 FMA-RRK44 FMA-RRK35 FMA-RRK44 FMA-RRK44 Rails MPFD35-3 SFD44 Universal Accessories for FMA Series ACRL-191B ACRL-291 SACR-191 VLS44 ACS-1 RAC-9 SACS-5 Vertical Power Distribution Rack Mount Power Distribution Lacing Accessories FMA44-25SA (Shown with optional Front Door) 800.876.3333...

  • Page 82: 700 Series Racks

    Sturdy welded racks feature 14-gauge CRS welded frames in 25 ⁄ " depth (35, 40, & 44 RU), 30" depth (44 RU) or 36" depths(44 RU). Designed with open sides for easy wiring access in single or multi-bay confi gurations. CRS corner gussets with four integral ⁄...
  • Page 83 RR44* RR44* * Models 744-30 & 744-36 ship with two pairs of factory installed rails. ** Optional Side Panel Lock also available. Model SP-LOCK. Did You Know... The UL Listed (UL 1678) 700 Series Racks are now seismic certified in accordance to the Telcordia NEBS (Network...

  • Page 84: Series Racks

    Supports are also on 19" panel spacing to accommodate vertical accessory mounting. Punched vents located at the cabinet top and bottom front edge may be covered with standard panels to control air handling. Universal Accessories for 500 Series...
  • Page 85 Optional Rear Rack Rails RR35 RR40 RR44 RR44* *Model 544-30 ship with two pairs of factory installed rails. ** Optional Side Panel Lock also available. Model SP-LOCK. Inserts for surface mount doors (left or right hinging) are factory installed and plugged for optimum aesthetics.

  • Page 86: Series Racks

    Cabinets include one pair of front-to-rear adjustable mounting rails tapped 10–32. Channel slides provide adjustment (four per side on 44 RU and 40 RU models; three per side on 35 RU; two per side on 24 RU and 21 RU models). Rails are man- ufactured to standard E.I.A.
  • Page 87 RCK-30 RCK-30 RCK-30 RCK-30 RCK-30 Caster Optional RR21 RR24 RR35 RR40 RR44 RR21 RR24 RR35 RR40 RR44 RR21 RR24 RR35 RR40 RR44 Rack Rails Universal Accessories for 200 Series ISOPANEL 244-25 BBG44 Copper Bus Bars Isolation Panel Accessory Panels 800.876.3333...

  • Page 88: 100 Series Racks

    They are complete with base, top panel, CT1020-962 Roller Truck Kit vented side panels, vented rear door with lock, one pair of fixed rails, mount- ing screws, and hardware. The rear door is removable and may be hung for right or left-hand hinging. The...
  • Page 89 PPR6 PPR6 Top Panel Optional Fan Panel EFT6-4 EFT6-4 EFT6-4 EFT6-4 EFT6-4 Optional Caster Kit CT1020-962 CT1020-962 CT1020-962 CT1020-962 CT1020-962 MPFD35-3 SFD44 Universal Accessories for 100 Series ISOPANEL 144-18 1 RU All Purpose Shelf Isolation Panel Accessory Panels SH1-10 800.876.3333...

  • Page 90: Wma Series Racks

    • Rails Include Hash Marks to Indicate Rack Unit Increments • New Side Lock Security System Provides an Easy Yet Secure Method of Joining Center Section to Back Pan • Extensive Internal Bracing Also Provides Cable Management / Pass Through •...
  • Page 91 Optional Rear Rack WMA-RR10 WMA-RR12 WMA-RR14 WMA-RR24 WMA-RR35 Rails HINGE PIN FLANGE BEARING INSTALL RETAINER CLIP AFTER PIN IS PLACED WMA16-23 MPFD35-3 SFD35 Universal Accessories for WMA Series ISOPANEL WMA16-23 1 RU All Purpose Shelf Isolation Panel Accessory Panels SH1-10 800.876.3333...

  • Page 92: 300 Series Sectional Wall Cabinets

    Corner brace supports, which straddle the back and side panel of the rear section (hinge-side), also feature round wire access holes for harnessing excess wire. All...
  • Page 93 300 Series Sectional Wall Cabinets 12" Center Models 15" Center Models 307-12 310-12 312-12 316-12 324-12 310-15 312-15 316-15 324-15 335-15 Width (Outside) 20.625" 20.625" 20.625" 20.625" 20.625" 20.625" 20.625" 20.625" 20.625" 20.625" (524 mm) (524 mm) (524 mm) (524 mm)

  • Page 94: Standard Series 19" Floor Cabinets

    The simple knock down design allows for easy storage and transportation to the job site. Assembly is a snap with a furniture style cam lock system. One pair of 11-gauge rack rails provides support for up to 250 lbs (113.39 kg) of rack mount equipment.
  • Page 95 ⁄ " holes for bolting to floors (optional). They can also be used as handles to carry and/or reposition the frames (install the members in the desired direction). The front-to-rear frame members are 16-gauge CRS, to provide structural rigidity and to serve as splice plates when joining 900 Series units.

  • Page 96: Accessory Panels

    " conduit couplings. This allows conduit to ™ be brought into the rack without touching the metal frame. Additional screw holes, which facilitate #8 sheet metal screws are provided for mounting standard 4 square electrical covers over each 2 ⁄...

  • Page 97: Drawers & Storage

    Three Shelves In One – Modular design allows you to choose the right shelf system for each job. The formed construction 16-gauge shelves are offered in three EIA compliant heights (2 RU, 3 RU, and 4 RU), 15" or SH22-3 22"...

  • Page 98: Shelves & Drawers

    17" (432 mm) outside of cabinet rails with lock-out protection. Dual-purpose design may be used right-side up as a shelf or upside-down as a tray with a protective lip according to desired application. Model PCD3-16 mounts 19"...

  • Page 99: Rack Screws

    In the two shelf configuration with the supporting side panels, the wall-mount shelf can be used for a wide variety of equipment with a locking door or top. It can be configured as a locking enclosure with two shelves or as a two-shelves-open enclosure, with the two remaining panels used with additional side panels (sold separately) to making a second open shelf unit.

  • Page 100: General Accessories

    44 RU (77") vertical lace bar provides a vertical lace path inside the rack to assure clean wire management. 44 RU (77") unit may be cut for use in shorter Atlas Sound racks. Mounting points are provided for attachment to internal rack hat sections.

  • Page 101: Electronic Accessories

    ACRL-191B included on both the front and rear panels of the unit to provide illumination to both the front and rear of the rack. A 15 amp re-settable circuit breaker is located on the front panel for easy access. A 6' power cord is factory installed however a removable access panel and instructions are provided in the event the unit is to be hard-wired with conduit for permanent installations.
  • Page 102 System is comprised of a six-circuit sequencer controller with remote start switch (use momentary switch only) terminals, external power supply (included) and choice of outlet strips with six or one circuit in regular and isolated ground versions (order sepa- rately). Models...
  • Page 103 Updated intake blower panel is equipped with stronger fans delivering 320 CFM and provides exceptional ventila- tion and cooling for equipment mounted in 19" cabinets. The air flow is directed to the rear of the cabinet for improved circulation. Model incorporates a washable and easily removable filter unit.

  • Page 104: Rack Mount Keyboard / Monitor Unit

    & surge protection. Nine total outlets are provided. Seven rear panel outlets are sequenced in three steps from the front panel or remote trigger sources along with a front panel convenience outlet. Unit includes a digital voltmeter display incoming line voltage and two retractable LED light fi...

  • Page 105: Microphone Floor Stands

    Bases are high-stability cast metal equipped with shock absorbing rubber pads Atlas Sound floor stands are made to last! Quality design and over 60 years worth of performances —on stage and off—offer proven reliability you can depend on. The fact is they're simply built better.

  • Page 106: Musician Series Tripod Stands

    This is an all-purpose tripod. The full height stand extends from 37" to 65" and includes an all-new three-piece clutch design with a highly durable metal clutch barrel. Tripod legs attach to a metal retainer assembly that includes a thumbscrew / brake system to provide secure positioning and prevent tube marring. Tube assemblies are durable CRS construction terminated in the industry standard ⁄...

  • Page 107: Studio Boom Stands

    Position tubing with nylon brake bushings for smooth horizontal adjustment. Resilient washers are made from compressed virgin wool fiber (in lieu of rubber) to offer quiet and secure positioning even after years of use. Extra- strength, steel T-bar knob assures no-fail locking with simple one-hand adjustment in the vertical plane. All versions include counterweights for increased balance and stability.

  • Page 108: Traditional Boom Attachments

    7 lbs and supports up to 150 lbs! Additionally, the stand folds to a minimal 53" making it a great portable stand for use in churches, schools, and theaters. Height adjusts from 54" to 85" for versatile positioning and support of sound, monitor, and control equipment.

  • Page 109: Desk & Banquet Stands

    " - 27 threads for safe transportation. Available in chrome or ebony (E) where noted. TM-1(E) Versatile mic mount for live sound and stereo recording. Mounts two or three mics onto any stand. Unit is ⁄ " wide and fits mic clamps with ⁄...

  • Page 110: Adapters And Fittings

    Quick Release Tube Adapter Quick Release Tube Adapter QR-2 The two piece design uses a unique ball bearing interconnect to designed to save set-up and tear down time in touring applications. For installation the QR-2 assembly is threaded between the ⁄...

  • Page 111: General Mic Stand Service Parts

    " Lock Rings – Ebony –25 Piece Bag LR58C-25 Replacement ⁄ " Lock Rings – Chrome –25 Piece Bag MS1012RF-24 Replacement Feet MS10 / MS12 – Pre 2003 – 24 Piece Bag MS12BASE Replacement Base for MS12 XX8625000 Replacement ⁄...

  • Page 112: Controlkom

    • Get your message out quickly and reliably - whether recorded or live, it can be broadcast in less than 20 seconds to an unlimited number of IP speakers, computer screens, and overhead paging systems •...

  • Page 113: Ip Speakers

    Atlas Sound Zone controllers allow simple integration of legacy systems with IP speaker control software. Single or dual zone versions typically rack mount in MDF / IDF locations and interface with existing or new Atlas Sound amps and traditional 70.7V loudspeakers. Output is balanced allowing simple twisted pair connection to amplifi er.

  • Page 114: Varizone ® Vab-1 Line

    Control software using simple USB interconnects. I-PAM is a compact, two-channel, network addressable module providing 12 watts of power that can be used to drive eight-ohm loudspeakers along with inputs for local sources, volume control and GPI. Atlas Sound will be integrating the I-PAM with various in-ceiling speaker systems as a way of offering turnkey solutions fit for a variety of...
  • Page 115 VARIZONE VAB Line 800.876.3333...

  • Page 116: Reference Data

    ����������������������� ������ ������������ Octave Frequency Range Characteristics ����������������������� ������ ������ ������������������������� 16 Hz – 32 Hz Lower Bass �������������������������� ������������ 33 Hz – 64 Hz Adds Warmth to Music 65 Hz – 128 Hz ������ ������ ������������������������� 129 Hz – 256 Hz Upper Bass ��������������������������...
  • Page 117 � �� ���� �������� ���������������� ��������������� ���� 1 centimeter = .3937 inches ���������������� ��������������� ��������� ��������������� ��������������� ���� � ��� 1 meter = 39.37 inches or 3.28 feet �������� ��������������� ��������������� ���� ����� ����� ����� ����� ��� � � ����...

  • Page 118: Rack Conversion Guide

    FRD24 WA100-70B-962 140-18 RX21-30SFD FRD35 WA100-77B-962 144-18 ~ Above RX Cabinets come with solid front doors ~ FRD40 ~ Below RX Cabinets do NOT come with front doors ~ 200 Series FRD44 RX14-25 WA200-36B-962 221-18 Side Panels RX21-25 WA200-42B-962 224-18...
  • Page 119 RCK-25 New Design SVP19-7-052 PPR4 CT-5030K RCK-30 SD5-145-052 SD3-14 SVP19-8-052 PPR5 ~ Above for use with 100, 200, or 500 Series ~ New Design ~ Below for use with 700 Series only ~ SVP19-10-052 PPR6 SD7-145-052 SD4-14 CS-HDPR RCK-700 SVP19-12-052...

  • Page 120: Index

    AD-6B ......108 AT35 ......52 CP700 ......63, 28 FA138T82FRK ....51 FD72M222W ....19 164-12A ..36-37, 40, 45 61-8W 37, 38, 43, 45, 48, 69 AD-78X ......108 AT35D ......52 CS95-8 ...19, 36, 40, 42, 46 FA138T87 ......15 FD72W ....18, 19 164-15A ....36-37, 40 62-8..18, 36, 38, 43, 45, 48...
  • Page 121 PFD24 ....9, 87, 89 RR310 ......91 SG-38GH ......54 SMBALLMOUNT-B ..8 TPP-36 ....79, 81, 94 YDA-TH ....70, 34 MPFD12-3 .....89 PFD35 79, 81, 83, 85, 87, 89 RR312 ......91 SG-NL4MP-1 ....54 SMBALLMOUNT-W ..8 TPS24-05 ....66, 73 MPFD14 ......92 PFD40 ....81, 83, 85 RR316 ......91...
  • Page 122 Meet the Atlas A-Team Steve Young VP Sales & Marketing Bruce Marlin Loyd Ivey VP of Design Engineering President / CEO Mike McCormick Ken Peck Manny Kitagawa Eastern Regional Sales Manager Midwest Regional Sales Manager Western Regional Sales Manager AtlasSound.com...
  • Page 123 Customer Relations Manager Credit Manager David Ewing Steven Brooks Tonya Schubert Facility Manager Tech Support Manager HR Manager Tony Satariano Jeff Kuells Dan Murphy Consultant Liaison Product Development Digital Products Support Manager Jonathan McDonell Mike Abernathy Marketing National Distribution Accounts Manager 800.876.3333...
  • Page 124 ATS002835 RevA © 2008 Atlas Sound LP. Atlas Sound is a registered trademark of Atlas Sound LP. All Rights Reserved. 484111 All other trademarks are the property of their respective owners.

This manual is also suitable for:

Fap42tFap42tcFap42-rrFa42t-6mbFa62t-8mbFap82t ... Show all

Table of Contents