Related Manuals for Soundcore Glow Mini
Summary of Contents for Soundcore Glow Mini
- Page 1 Glow Mini User Guide (A3136) At a Glance Charging Your Speaker Powering On / Off Using Your Speaker Button Controls soundcore App Reset Specifications...
-
Page 2: Charging Your Speaker
At a Glance LED Ring Light Button Bluetooth LED Volume Down Button USB-C Charging Port Volume Up Button Strap PartyCast Button Power Button Bluetooth Button Power LED Charging Your Speaker • Use a certified USB-C cable and charger to prevent any damage. •... -
Page 3: Powering On/Off
This speaker will power off automatically after 20 minutes if no device is connected. Using Your Speaker Bluetooth Mode Press the Bluetooth button to enter Bluetooth pairing mode, then select "soundcore Glow Mini" from the Bluetooth list to connect. Glow Mini... - Page 4 Bluetooth button to enter Bluetooth pairing mode. TWS Mode Two identical Soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel).
- Page 5 To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds. PartyCast Mode With one speaker connected to a smartphone, press the PartyCast button on up to 100 Soundcore speakers with PartyCast function to synchronize audio and light. Primary Speaker ×1 ×1...
-
Page 6: Button Controls
The body light on the speaker changes with the rhythm of the music. There are 5 preset music-sync light modes: Campfire Vibes / Neon Night / Spring Break / Euphoric Dance / Romantic Stroll. You can also check all available body light modes in the soundcore app. Press Switch Light Modes... - Page 7 EQ settings: There are 4 preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres. • soundcore Signature: Standard EQ mode optimized for well-balanced sound. • Voice: Voices stand out more clearly from other ambient sounds.
-
Page 8: Specifications
Specifications DC Power Input Battery Capacity 1800mAh/3.7V Audio Output Power Speaker Driver 1.75" Full Range x1 Charging Time 3 Hours Play Time (varies by volume level and Up to 12 Hours music content) Waterproof Level IP67 Bluetooth Version Bluetooth Range 100m / 328ft...
Need help?
Do you have a question about the Glow Mini and is the answer not in the manual?
Questions and answers
Can you connect the Soundcore Glow Mini to a laptop via USB wire?
No, the Soundcore Glow Mini connects via Bluetooth. The USB-C port is only for charging, not for wired audio connection.
This answer is automatically generated