Floppy Disk Drive - Asus V1J Installation Manual

1.7.3

Floppy disk drive

1. Remove the dummy cover and
insert the floppy disk drive into the
bay.
3. Orient and plug the floppy interface
cable into the floppy disk drive. The
red stripe on the cable is the pin1
end and should match pin1 on the
floppy disk drive.
16
2. Align with the screw holes and
secure the disk drive with screws.
4. Connect the floppy power cable to
the connector at the back of the
floppy disk drive.
Chapter 1: Quick Start