Front Panel Cables - Asus V1J Installation Manual

1.8

Front panel cables

To connect the front panel cables:
• RESET (Reset Switch)
• PLED (Power LED)
• PWRSW (Power Switch)
• IDE_LED (IDE Hard Disk Active LED)
• SPEAKER (Speaker Connector)
20-8 pin front panel connector
10-1 pin front panel connector
M2N-X
•
•
•
•
20
PANEL
F_PANEL
The front panel cables of your chassis may differ with models or designs.
Connect these connectors to the motherboard according to the label.
If the LEDs do not light up and the pin location is correct, you might have
mistaken the ground pins with the signal pins. Usually the white wire stands
for the ground pins and the color‑coded wire for the signal pins.
The SPEAKER, RESET and PWRSW front panel cables have no specific
orientation, while IDE_LED and PLED cables do. Connect the cable PIN1
to the connector PIN1 on the motherboard.
The front panel connector varies with your motherboard model, refer to the
user guide for more information.
PLED SPEAKER
PIN1
PIN1
RESET
IDE_LED
PWRSW
Requires an ATX power supply.
*
PWR LED PWR BTN
HD LED RESET
Chapter 1: Quick Start