MetalTech CLIMB-N-GO I-CNG Operational Safety And Assembly Instructions page 9

INSTALLATION
6. To install the Climb-N-Go® wheels more easily, slide a one-inch-thick (1 in.) piece of
wood under the scaffolding casters.
7. Temporarily remove the locking-pins from the scaffolding casters.
8. Position the wheels of the Climb-N-Go® at the bottom of the scaffolding ladder.
Secure them using the locking-pins provided.
9. Put back in place the locking-pins of the scaffolding casters.
10. Tighten the tightening knob firmly so that the scaffolding and the Climb-N-Go®
wheels are perfectly lined up and in contact.
NOTE: To install the Climb-N-Go® on a BuildMan® (I-BMSS) scaffolding, first unscrew
and remove the yellow adapter first.
8
9
7
6
10
NOTE: To install the Climb-N-Go®
on a BuildMan® (I-BMSS) scaf-
folding, first unscrew and remove
the yellow adapter first.
9