Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MetalTech M-MRT51010
Summary of Contents for MetalTech M-MRT51010
- Page 1 OSHA TOWER CONFORMANCE TO 29 CFR Pt. 1926 ANSI MEETS CODE A10.8 MODEL: M-MRT51010 OPERATIONAL SAFETY AND ASSEMBLY INSTRUCTIONS Picture may differ from actual product READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
- Page 2 SET-UP INSTRUCTIONS Lock all casters by firmly depressing the top tabs. Insert casters in second frame’s lower extremity. Insert casters in frame’s lower extremity. Secure casters to the frame using pig tails lock. Secure casters to the frame using pig tails lock. Secure the first cross brace to the second frame.
- Page 3 Install the 3 aluminium platforms at the same level. Install the guardrail posts onto the coupling pins seated on top of the frames. Secure the platforms to the frames using the locks beneath it. Put a pig tail lock through the top and bottom of each coupling pin to avoid any separation.
- Page 4 KEEP THIS MANUAL FOR FUTURE REFERENCE Keep this manual and the original sales invoice in a safe, dry place for future reference. WWW.METALTECH.CO 1 800 363-7587 Metaltech is a registered trademark of Metaltech-Omega inc. LAVAL, QUEBEC, CANADA H7L 3N6 IN-MRT51010-EN-01...
Need help?
Do you have a question about the M-MRT51010 and is the answer not in the manual?
Questions and answers