SE100 Single-Ended Test Set ® AFL's FlowScout SE100 is designed to verify fiber connectivity and measure insertion loss to the end of fibers terminated with a 1430 nm Wavelength Optical Reflector. It combines an optical light source and power meter into one, low-cost test set allowing single technician testing.
The pocket-sized FlexScan FS300 includes an integrated optical light source, power meter and visual fault locater (VFL). It can be easily coupled with AFL’s award-winning FOCIS inspection probes or optical fiber PC Software Mobile App identifiers (OFI) to give technicians everything they need to locate and resolve any optical network issues.
FTTH PON networks. FlexScan FS200 OTDRs automate test setup, simplify results interpretation, and shorten test time, all at an affordable price point. AFL’s SmartAuto mode requires just the push of a button to test the network.
MPO switch control to automate multi-fiber testing. Combining SmartAuto network-optimized event detection and analysis with its intuitive LinkMap view of the tested network, AFL’s FlexScan OTDRs enable even novice technicians FlexScans equipped with Bluetooth option (W1) support Bluetooth transfer of results FlexScan OTDR to quickly and easily troubleshoot or fully characterize optical fiber networks.
Page 12
OTDRs & Troubleshooters FO Inspection FO Cleaning OLTS Testers Fiber Identifiers Reporting SW FlexScan FS200 Order Entry ® All kits include a FlexScan FS200 with AC charger, battery, carry strap, SC/2.5 mm connector adapters, FlexReports, USB cable, and carry case. FS200-XXX-Basic, Plus, PRO, BIPM Kits Order Entry: FS200-[MOD]-[KIT]-[PW]-[C]-[CC]-[LNG]-[AC]-[FR]-[TIP] FS200-XXX-MPO Kits Order Entry: FS200-[MOD]-MPO-P1-W1-[C]-[LNG]-[AC]-[MPOC] FS200-303/304-FTTH-PRO Kits Order Entry: FS200-[MOD]-FTTH-PRO-[CC]-[LNG]-[AC], where:...
Reporting SW One-Touch FTTH PON Troubleshooter TS100 FTTH PON Troubleshooter AFL's FlexScan TS100 is a family of pocket-sized optical troubleshooters for frontline service technicians to enable them to quickly verify or diagnose GPON, video and XG/XGS- PON or 10GEPON networks.
The lower cost FlexScan TS100-60 will test to the splitter but not through the splitter. AFL’s FlexScan TS100 Optical Troubleshooter is an easy-to-use, all-in-one tool for detecting, Consequently, it will not detect and report macro-bends or poor connections at the identifying, locating, and resolving single-mode optical network issues.
Page 15
OTDRs & Troubleshooters FO Inspection FO Cleaning OLTS Testers Fiber Identifiers Reporting SW FlexScan ® TS100 Order Entry TS100-[MOD]-[KIT]-[Pn]-[Wn]-[LNG]-[AC]-[FR]-[TIP], where: [MOD] TS100 Configuration [FR1] 150 m SMF Fiber Ring 1650 nm filtered Live PON Troubleshooter; Test to Splitter Absent N/A in Basic Kits 1650 nm filtered Live PON Troubleshooter;...
Protect your OTDR ports from damage due to mating with dirty or damaged launch cables, patch cords, or normal wear-and-tear. Equip your FlexScan FS200/ FS300 OTDRs or FlexScan TS100 Troubleshooter with a field-replaceable connector, which installs in seconds and accepts AFL’s tool-free interchangeable SC, LC, FC, and ST connector adapters.
NS Bench Top Model AFL network simulators are custom-designed bench-top or rack mountable boxes intended to duplicate installed fiber optic networks. Network simulators may be ordered with customer- specified lengths of multimode or single-mode fiber. Events such as connections, fusion splices, and mechanical splices can be added at various points within the fiber to duplicate installed networks.
To measure the insertion loss of the near-end and/or far-end connection of a fiber optic link, an OTDR requires a launch and/or receive/tail test cord, which essentially are test jumpers that can range from about 150 m to 1 km in length. AFL offers coiled lengths of 50 μm and 62.5 μm multimode, standard single-mode fiber (G.652) and bend-insensitive fiber (G.657), packaged in compact rings for use as OTDR test cords.
Page 20
Notes: a. Contact AFL for special order fiber rings. Not all combinations of lengths and connectors are supported. Minimum Order Qty of 10. b. Contact AFL for other special order configurations of MPO-terminated multi-fiber single-mode or multimode fiber rings. Minimum Order Qty of 10.
OTDRs. The FOCIS Flex offers built-in pass/fail analysis to updated IEC 61300-3-35, IPC, AT&T or user set criteria. The device can also be used for OptiTap and MTP/MPO inspections with AFL adapters. AFL's free Windows-compatible FlexReports Basic Test Results Manager software with a 60-day reports trial or optional FlexReports Advanced with full reporting capability quickly generates easy-to-understand connector inspection reports including images and pass/fail results.
Put the speed and power of fiber inspection in your hands FOCIS Lightning2 focuses, captures, analyzes all fibers with the FOCIS Lighting2. Contact your AFL representative to in the MPO/MPT end-face with a click of a button! schedule a demo or get more information.
FOCIS-LT2-NW-N FOCIS-LT2-NW-U FOCIS-LT2-NW-A FOCIS-LT2-NW-UA FOCIS-LT2-NW-UASF RPTS-UP-KITS-1 Software: FlexReports Advanced. Provides Professional Test Reports for use with AFL instruments. For use only at time of purchase with any kit. PC Software FOCIS Lightning2 Order Entry – FOCIS−LT2-[NW]-[K]-[PLUG], where [NW] Wireless Option [PLUG] Country-specific AC power plug Contains (ea.)
AFL-CleanDisplay-1 AFL offers a custom display to showcase our most popular connector cleaning products. This display features 3 tier shelves and attention-grabbing product images. The display accommodates a variety of products and enables easy grab-and-go purchases. Overall Width x Height x Depth: 11.5” x 15.3” x 8.1”...
The FCC2 is not hazardous and not regulated for all modes of transportation and shipping including air-cargo. For best results, use CCT cleaning sticks with FCC2 fluid! AFL NO. Description FCC2 in 3 oz/85 g Can...
Type A and -SA: Designed for single 2.5 mm ferrules (SC, FC, ST, and D4). • Cletop –SB Type B and -SB: Cleans SC, SC2, FC, ST, DIN, D4, MU, LC, MT, MPO/MTP without pins, MT-RJ without pins. • AFL NO. Description Cletop –S Series 8500-10-0020MZ Cletop-SA with Blue Tape...
MMC-16 and MMC-24 connectors easily MMC-16 MMC-24 and effectively in 1/2 the time as traditional methods leading to reliable signal transmission and extended lifespan of the connector. AFL NO. Description # of Cleans 8500-05-MMC16 One-Click Cleaner MMC for MMC-16 Connectors 500+...
Fiber Identifiers Reporting SW One-Click ® Cleaners U.S. Patent Numbers 7,212,719 and 8,087,118 NEOCLEAN Fiber Connector Cleaning Tools Number # Of AFL NO. Description of Cleans QTY AFL NO. Description Cleans 8500-05-0001MZ One-Click Cleaner SC, ST, FC 8500-15-0900MZ 500+ NEOCLEAN-E1 for MU and LC connectors with UPC/APC polishes 750+...
Multi-Fiber Switch Models AFL’s Multi-Fiber Switch enables the testing of 12-fiber cables without the need to use a breakout cable. The switch allows you to utilize a single piece of test equipment to seamlessly cycle through all of the fibers in a connector regardless of polarity without having to disconnect and reconnect your test equipment.
® SE100 Single-Ended Test Set AFL’s FlowScout SE100 is designed to verify fiber continuity and measure insertion loss to the end of fibers terminated with AFL’s 1430 nm Wavelength Optical Reflectors. When a reflector is detected, the FlowScout SE100 immediately reports its presence (confirming continuity to the reflector) and measures insertion loss to the reflector at 1430 nm wavelength.
® AFL’s FlowScout SE100 is designed to verify fiber continuity and measure insertion loss to the end of fibers terminated with AFL’s 1430 nm Wavelength Optical Reflectors. When a reflector is detected, the FlowScout SE100 immediately measures insertion loss to the reflector at 1430 nm wavelength. The reflector is near-transparent to PON and other wavelengths, allowing it to remain installed during network operation.
One-Click Cleaner Mini-500 SC, ST, FC; 500+ cleans 4050-00-0034MR AC Adapter AFL ships one power plug (of customer choice) along with the order. Please select one out of the four plugs listed below. 4050-00-0030EUMR EU Power Plug for AC charger...
PC software (Basic License). Loss Measurements (nm) Features Dynamic Range Power Light Fiber Price (dB) Model AFL Number Connector Meter Source Type 850 1300 1310 1490 1550 Set Ref PC S/W Auto Dual Test SLP5-30-0904PR SLP5-6 SLP5-30-0905PR SLP5-6...
Encircled Flux (EF) requirements (IEC 61280-1-4 and TIA-568-14-B) specify multimode launch conditions at the end of an EF qualified Reference Grade Test Cord (RGTC). Thus, compliance to EF standards requires both, a light source with EF compliant optics and a RGTC. AFL offers RGTCs with a range of connector options. RGTCs are qualified in one direction and marked accordingly (input/output).
Verify before disconnect! Avoid costly network disruption! OFI-BIPM & OFI-BIPMe Optical Fiber Identifiers AFL’s OFI-BIPMe is an easy-to-use hand-held device that determines if a fiber is live, the transmission direction, carrying up to four tones, and the relative core power. Its best-in-breed sensitivity makes it the only OFI that works on bend insensitive fiber and in a bright sunlight.
1.1 / 1.5 / 1.7 / 2.0 / 3.0 mm SM jacketed fiber 900-1700 nm (2) AA CW, Traffic or 270 Hz, 330 Hz, 1 kHz, 2 kH OFI-BIPM/-BIPMe Power Meter Port Adapters AFL NO. Adapter Type Test Port BIPM-00-FC OPM (power meter)
1.25 mm universal adapter for LC and MU connectors. Visualize defects in your single-mode and multimode Built with the quality you expect from AFL, a leading fiber optic cables with the press of a button! global supplier of passive fiber optic components for...
Now a low power version is also available! AFL’s compact VFI4 injects high-powered red-laser light to provide exceptional brightness and range for locating defects in single-mode and multimode fibers. During installation and activation, the VFI4 is used for quick continuity checks, fiber tracing, splice verification, and Pass/Fail validation for mechanical connectors. The VFI4 is also an essential troubleshooting tool to find sharp bends, breaks, faulty connectors, and other defects that “leak”...
™ reporting tool designed for use with AFL fiber optic test and inspection products. Designed for speed and simplicity, FlexReporter enables you to generate clear and easy-to-read reports quickly and easily.
FlexReports PC software is integrated with the cloud to provide remote results download and a FlexApp is a mobile Android and iOS App that supports AFL's FlexScan OTDRs and FOCIS connector 3-click fast cloud-based reporting tool. The FlexReports mobile companion FlexApp provides on-site inspection products (FOCIS Flex, FOCIS Lightning).
TRM Test Results Manager, a PC-based software, provides comprehensive test results (OTDR trace, connector inspection, optical loss) test results analysis and reporting. Designed for use with AFL test and inspection products, TRM is available in Basic and Advanced versions. TRM Basic allows technicians to quickly view test results, analyze OTDR traces, view loss or certification results, batch-edit OTDR traces and create acceptance reports conforming to industry guidelines.
OTDRs & Troubleshooters FO Inspection FO Cleaning OLTS Testers Fiber Identifiers Reporting SW ACCESSORIES FOR DISCONTINUED PRODUCTS AFL NO. Description Model AFL NO. Description Model C850 OTDR, C840 and C880 Accessories and Connector Adapters 2900-50-0004MR ST adapter for OTDR/OLS port 4050-00-0122PR Vehicle charger/supply, 18 V, 6.7 A, 120 W...
Page 53
OTDRs & Troubleshooters FO Inspection FO Cleaning OLTS Testers Fiber Identifiers Reporting SW Accessories for Discontinued Products AFL NO. Description Model AFL NO. Description Model FOCIS Duel Accessories 2900-50-0002MR M210e, FC adapter for OTDR port 4050-00-0030EUMR EU power plug for AC charger...
Page 54
OTDRs & Troubleshooters FO Inspection FO Cleaning OLTS Testers Fiber Identifiers Reporting SW Accessories for Discontinued Products AFL NO. Description Model 8800-00-0219 2.5 mm open Universal (accepts SC duplex, OptiTap) 8800-00-0230 MT-RJ (A side only) 8800-00-0231 MT-RJ (A side or B side)
CALIBRATION SERVICES Servicing your valuable AFL Test & Inspection Equipment at authorized AFL calibration facilities ensures you are getting the most out of your equipment and it is performing accurately. In keeping with ISO certification guidelines, AFL recommends the following calibration intervals for AFL Test & Inspection...
Calibration and Repair Facilities AFL has an authorized calibration/repair facility for AFL products in the USA, Europe and Asia Pacific. Please contact customer service for a return authorization number prior to sending your AFL test equipment in for repair or calibration.
All other AFL products are warranted against defective material and workmanship for a period of (1) one year from the date of delivery to the end user. • Any product that is found defective within the warranty period will, at the discretion of AFL, be repaired or replaced. Warranty will be voided if the product has been •...
All other AFL products are warranted against defective material and workmanship for a period of (1) one year from the date of delivery to the end user. • Any product that is found defective within the warranty period will, at the discretion of AFL, be repaired or replaced. Warranty will be voided if the product has been repaired or altered by •...
OTDRs & Troubleshooters FO Inspection FO Cleaning OLTS Testers Fiber Identifiers Reporting SW REVISION CHANGES HISTORY April 15, 2024 New Products and Services AFL NO. Description Page FlowScout ® SE100 Single-Ended Test Set 8500-05-MMC16 One-Click Cleaner MMC for MMC-16 Connectors 8500-05-MMC24...
Page 60
FO Cleaning OLTS Testers Fiber Identifiers Reporting SW AFL NO. Description CCTS-16-0910MZ For MT-RJ connectors and 2.0 mm and 1.6 mm termini in sockets (female MIL T 29504/15 for MIL C 28876 and MIL T 29504/05 for MIL C 38999, MT-RJ both jumpers and adapters) ROGUE ®...
Need help?
Do you have a question about the FlexScan FS300 Quad OTDR and is the answer not in the manual?
Questions and answers