Table of contents Table of contents General information..........................5 1.1 Symbols and signal words....................... 5 Safety instructions............................. 8 Features............................... 12 Installation..............................13 Connections and controls........................16 Technical specifications........................18 Cleaning............................... 21 Protecting the environment......................22 VP-m20 Video BiLight Panel LED Spotlight...
Page 4
VP-m20 Video BiLight Panel LED Spotlight...
Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document. VP-m20 Video BiLight Panel LED Spotlight...
Page 6
Warning signs Type of danger Warning – dangers due to batteries. Warning – dangerous optical radiation. Warning – suspended load. VP-m20 Video BiLight Panel LED Spotlight...
Page 7
General information Warning signs Type of danger Warning – danger zone. VP-m20 Video BiLight Panel LED Spotlight...
Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervi‐ sion. Keep small parts away from children and make sure that the device does not shed any small parts (such knobs) that children could play with. VP-m20 Video BiLight Panel LED Spotlight...
Page 9
Never subject the device to liquids or moisture. Never move the device to another location while it is in operation. In environments with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by qualified specialists at reg‐ ular intervals to prevent damage due to overheating and other malfunctions. VP-m20 Video BiLight Panel LED Spotlight...
Page 10
If the device is mounted on an unsuitable stand, there is a risk that the stand will fall over and cause damage. Only use stands whose maximum bearing capacity is at least as high as the weight of the device. Always ensure that the stand is stable. VP-m20 Video BiLight Panel LED Spotlight...
Page 11
Recharge the lithium-ion batteries about every three months if they are stored for a longer period of time to avoid permanent damage due to too deep self-discharge. Fully charge the lithium-ion batteries only shortly before use at room temperature. VP-m20 Video BiLight Panel LED Spotlight...
For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness. VP-m20 Video BiLight Panel LED Spotlight...
Always secure spotlights with a secondary safety attachment, such as a safety cable or a safety chain. Always secure the barn door with a safety cable on the spotlight. The safety cable must run outside the barn door to not interfere with the light emission. VP-m20 Video BiLight Panel LED Spotlight...
Page 14
Make sure that illuminated surfaces are more than 2 m away. Do not operate the device in ambient temperatures above 40 °C. Always ensure sufficient ventilation at the operating location. VP-m20 Video BiLight Panel LED Spotlight...
Page 15
Always work from a stable platform whenever installing, moving or servicing the device. While you do this, the area underneath the device must be cordoned off. Additionally secure the device with a safety cable against falling. The safety cable must be attached to the bracket. VP-m20 Video BiLight Panel LED Spotlight...
Connections and controls Connections and controls & POWER ö VP-m20 Mobile Video BiLight Panel VP-m20 Video BiLight Panel LED Spotlight...
Page 17
5 [CW] | Control for adjusting the brightness (cool white) 6 [WW] | Control for adjusting the brightness (warm white) 7 Bracket for suspension or mounting on a stand 8 Locking screws for the bracket 9 Barn door VP-m20 Video BiLight Panel LED Spotlight...
5-V power supply Power consumption 45 W Power supply Power adapter, 100 - 240 V 50/60 Hz Operating voltage 15 V / 5 A, centre positive Battery Battery type Lithium-ion Voltage 11 V VP-m20 Video BiLight Panel LED Spotlight...
Page 19
Suspended, on a stand Dimensions (W × H × D), 182 mm × 182 mm × 71 mm without barn doors Weight 1.5 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20%…80% (non-condensing) VP-m20 Video BiLight Panel LED Spotlight...
Page 20
Technical specifications Further information Floor housing Remote control Not possible Housing colour Black Design LED panel Suitable for outdoor use Fanless Wireless DMX Optionally available (item no. 496006) VP-m20 Video BiLight Panel LED Spotlight...
Dispose the built-in lithium batteries together with the device. Check for an appropriate collection facility. Dispose of the batteries and rechargeable batteries at relevant collection points or through your local waste facility. VP-m20 Video BiLight Panel LED Spotlight...
Page 23
Also note that waste avoidance is a valuable contribution to environmental protection. Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal. If your old device contains personal data, delete those data before disposing of it. VP-m20 Video BiLight Panel LED Spotlight...
Page 24
Notes VP-m20 Video BiLight Panel LED Spotlight...
Page 25
Notes VP-m20 Video BiLight Panel LED Spotlight...
Page 26
Notes VP-m20 Video BiLight Panel LED Spotlight...
Need help?
Do you have a question about the VP-m20 Video BiLight Panel and is the answer not in the manual?
Questions and answers