Building-In - JUNO JKI 2438 Operating Instruction

Building-in

Dimensions of the recess
JKI 2438/JKI 4438
Height of housing (1) 880
Depth of housing (2)
Width of housing (3)
PR0
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
1. Slide the appliance into the recess, pushing it
against the wall on the handle side.
D022
2. Apply joint the sealing strip as shown in figure.
D132
20
JKI 4468
1225
550 550
560 560
3
1
2
A
3. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4
mm
screws provided in the kit included with the
mm
appliance. Snap vent grille (C) and hinge cover (D)
mm
into position.
4. Apply covers (B) on joint cover lugs and into hinge
holes.
5. Separate parts A, B, C, D as shown in the figure.
D
D727
B B
D013
A
C
D
PR266
C
B