Important Safety Instructions Technical specifications Description of the Appliance Installation Positioning Electrical connection Door reversibility Cleaning the interior Instructions for totally built-in appliances Starting-up Temperature control Fresh food refrigeration Movable shelves Positioning the door shelves Hints Hints for refrigeration Maintenance...
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
Always ensure that there is adequate heat exchanger. Information on your local ventilation as a failure to do this will result in disposal sites may be obtained from your component failure and possible food loss. See municipal authorities.
Insert the plug into the wall socket. positioned as desired. Open the door and turn the thermostat control knob, to be found on the upper right hand side of the inner compartment, clockwise beyond position «O» (OFF) to start the appliance.
Cooked food, cold cuts, jelly, etc.: these should be Raw meat (beef, pork, lamb & poultry): wrap in well covered and can be stored on any of the glass polythene bags and place on top of the salad shelves.
2. unhook the moving part by pressing it as shown in the figure. If the door is open and the light does not come on, check that the bulb is properly screwed in; if it still does not work, replace the bulb with one of the same power.
TECHNICAL SPECIFICATIONS The technical data is indicated in the rating plate on the left side inside the appliance. INSTALLATION lf this appliance featuring magnetic door seals is This appliance complies with the following to replace an older appliance having a spring lock E.E.C.
D022 3. Slide the appliance into the recess, pushing it against the wall on the handle side. PR 32 1. It is necessary that the niche is provided with a conduct of ventilation having the following dimensions: Depth 50 mm...
Page 10
PR266 PR167 6. Separate parts A, B, C, D as shown in the figure. 9. Open the appliance door and the furniture door at 90°. Insert the small square (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure.
Need help?
Do you have a question about the JKI 1000 and is the answer not in the manual?
Questions and answers