Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for JUNO JKI2435
Summary of Contents for JUNO JKI2435
- Page 1 JKI 2435 GEBRAUCHSANWEISUNG OPERATING INSTRUCTION 2222748-63...
-
Page 2: Table Of Contents
Description of the appliance Installation Positioning Electrical connection Cleaning the interior Door reversibility Starting-up Inner door reversal Temperatur control Instructions for totally built-in appliances Fresh food refrigeration Inner arrangement Freezing fresh food Storage of frozen food Thawing Ice-cube production Defrosting Maintenance... -
Page 3: Important Safety Instructions
Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. -
Page 4: Description Of The Appliance
The materials used on this appliance marked up. Always ensure that there is adequate with the symbol are recyclable. ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions. DESCRIPTION OF THE APPLIANCE... -
Page 5: Use
Open the door and turn the thermostat control knob, Cooked foods, cold dishes, etc..: these should be to be found on the upper right hand side of the inner covered and may be placed on any shelf. compartment, clockwise beyond position «O» (OFF) Fruit and vegetables: these should be thoroughly to start the appliance. -
Page 6: Freezing Fresh Food
To permit storage of food packages of various sizes, the central door shelf can be adjusted in height. To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. CP1SIG... -
Page 7: Ice-Cube Production
However, when the ice becomes very thick on the inner liner, complete defrosting should be carried out as follows: 1. pull out the plug from the wall socket or turn the thermostat knob to the «O» setting; 2. remove any stored food, wrap it in several layers of newspaper and put it in a cool place;... -
Page 8: Maintenance
Periods of non-operation D411 When the appliance is not in use for long periods, If the door is open and the light does not come on, take the following precautions: check that the bulb is properly screwed in; if it still remove the plug from the wall socket;... -
Page 9: Technical Specifications
TECHNICAL SPECIFICATIONS The technical data is indicated in the rating plate on the left side inside the appliance. INSTALLATION lf this appliance featuring magnetic door seals is This appliance complies with EEC directive to replace an older appliance having a spring lock... -
Page 10: Door Reversibility
(Fig.) and withdraw it from its seat together with the door; 2. remove plug (2) and fit it in the hole left open on the opposite side; 3. turn the door through 180°, remove the bracket (1) and refit it on the opposite side. - Page 11 Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap vent grille (C) and hinge cover (D) into position. D727 5. Apply covers (B) on joint cover lugs and into hinge holes. D013...
- Page 12 6. Separate parts A, B, C, D as shown in the figure. PR266 7. Place guide (A) on the inside part of the furniture door, up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied.
- Page 13 10. Should the lining up of the furniture door be necessary, use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly. PR168 11. Fix cover (D) on guide (B) until it clips into place. PR167/1...
Need help?
Do you have a question about the JKI2435 and is the answer not in the manual?
Questions and answers