Table of Contents
Advertisement
Apply joint the sealing strip as shown in figure.
Slide the appliance into the recess, pushing it
against the wall on the handle side.
Open the door and push the appliance against the
side of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance. Snap vent grille (C)
and hinge cover (D) into position.
If after having carried out the previously described
operation there is still some space between the
appliance and the kitchen unit, fit the trimming
provided together with the appliance on the stop
strip (A).
Apply covers (B) on joint cover lugs and into hinge
holes.
D765
A
D023
D
D723
A
D265
B
D726
C
21
Advertisement
Table of Contents
