Avoid damaging The domestic refrigerators and freezers are designed the cooling unit, especially at the rear near the to be used specifically for the storage of edible food- heat exchanger. Information on your local stuffs only.
For building into kitchen units follow the special must be as shown in “Building-in” instructions given. Fig. 1. A t t e n t i o n : k e e p ventilation open- Electrical connection ings clear of ob- Before plugging in, ensure that the voltage and fre- struction.
Page 5
Fig. 7 and mark the position of the external holes. After preparing the holes, screw the run- ners to the kitchen PR33 u n i t d o o r u s i n g 3.5x16 mm screws.
The walls of the refrigerator are equipped with a series frost to form on the rear wall. In this case the dial of runners so that the shelves can be positioned as must be set to a higher temperature to allow auto- desired.
Positioning the door shelves prepare food in small portions to enable it to be rapid- ly and completely frozen and to make it possible sub- To permit storage of food packages of various sizes, sequently to thaw only the quantity required;...
Fill these trays with water, then put them in the freezer follows: compartment. pull out the plug from the wall socket or turn the ther- Do not use metallic instruments to remove the trays mostat knob to the «O» setting;...