Refer to relevant instructions. There are working parts in this appliance which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instruc- tions.
fit the door again and temperature between +16 C and +32 C (class N) or the pin.
Page 5
If after having carried out the operation described in Press in the joint covers between the appliance and section 2 there is still some space left between the ap- the kitchen furniture. pliance and the kitchen unit, fit the trimming provided Fig.
Page 6
If the appliance is to be fitted laterally to the kitchen unit to approx. 90 . unit, it will be sufficient to loosen the screws of the lit- Place the little plates over the runners. tle plates (F), move them as shown in Fig. 9a and then Hold the doors of the appliance and the unit together fasten them up again.
With room temperature lower than +14 C switch «A» age time. (see Fig. 10) should be depressed (the built-in light will On the rear of the door you will find a list of foods fol- come on). lowed by a number. These numbers indicate the maxi- mum period of time for which the food in question Fig.
Remove any stored food, wrap it in several layers of newspaper and put it in a cool place. Pull out the plug from the wall socket or turn the ther- mostat knob to the «O» setting. Leave the door open.
The light bulb of the refrigerator can easily be reached. If the light does not come on when the door is opened, Clean the interior periodically with lukewarm water check that the light bulb is correctly screwed in; if after and some bicarbonate of soda;...
Need help?
Do you have a question about the JKG7471 and is the answer not in the manual?
Questions and answers