Step 2 - Front Panel Display & Lights - Digital Alert Systems DAS3-GX Quick Start Manual

DASDEC-III
Quick Start Guide
The front panel display currently shares information as "pages" with four lines of data. The fourth line always
displays the currently set date and time. The pages may be cycled using the up and down arrows on the
directional pad to the right of the display. The display automatically switches back to page one after a few
seconds of inactivity.
Page One
Line one shows the total
number of active alerts.
Line two shows a crawl of one
of those active alerts along
with whether the alert was
decoded (D), originated (O),
CAP (C) or forwarded (F).
Line three shows the time
when the currently crawling
alert will end.
Page Two
Line one displays audio sources
1 through 4, pressing the down
arrow again will display your
IPAWS sources.
Line two displays the source
status: HIGH, ELEVated, OK,
LOW, or ZERO.
For IPAWS sources;
CONNected, POLLing, or OFF.
Page | 6
Step 2 – Front Panel Display & Lights
Rev: 5.1