Table of Contents
Advertisement
DASDEC-III
Quick Start Guide
The DASDEC has two forwarding modes, Auto-Forward and Manual.
The manual mode requires the user to acknowledge and forward a decoded alert. An alert received and
matching the Alert Agent settings is queued on the Alert Events page with a button labeled 'Forward'. A user
must click the 'Forward' button, which will then air that alert.
Auto-forward mode allows alerts to be forwarded without user intervention (Aired automatically).
To edit the forwarding mode, navigate to Setup > Station > Global Options. Under the Alert forwarding
section is a check box labeled "Enable Auto-Forward Mode". When checked, auto-forward mode is set. When
unchecked, the device is in manual mode. Indicated below are examples of auto-forward
(shown in
green) and
manual
(shown in
red).
Note: the DASDEC-III can be set with a combination of both automatic manual forwarding modes.
Page
| 15
Rev: 5.1
Advertisement
Table of Contents
Need help?
Do you have a question about the DAS3-GX and is the answer not in the manual?
Questions and answers