Table of Contents
Advertisement
DASDEC-III
Quick Start Guide
Step 4 – Assigning Radio Tuners
For internal radio setup navigate to Setup > Audio > Audio Inputs. Under Primary L1 and R1 source there will
be a drop-down menu; select Internal/ Radio. Select whether the monitored station is AM, FM, or NOAA using
(shown in
blue) and the station frequency
(Shown in
purple). Edit the audio level field
the drop-down menu
with a higher or lower level
(Underlined in
red) until the status shown is "Ok" and colored green. It's best to
have the levels as low as possible while still maintaining an "OK" status.
(Shown in
red).
For external radio setup navigate to Setup > Audio > Audio inputs tab and under the Primary L1 & R1 source
adjust the levels to an "Ok" or green status. The best setting would be the lowest possible level that still
retains an "Ok" status.
Each source has a text box that can be used to assign a
call sign to. This isn't required but it is recommended as it
will make distinguishing your sources easier.
Page
| 10
Rev: 5.1
Advertisement
Table of Contents
Need help?
Do you have a question about the DAS3-GX and is the answer not in the manual?
Questions and answers