Troubleshooting - Fagor IFA-80 AL - ANNEXE 410 Manual

6 TROUBLESHOOTING

If you have questions about whether your cooktop surface is working correctly,
PROBLEM
When you switch the unit on, the
supply-line breaker trips off or
the supply-line fuse burns.
When you switch the unit on,
only one side of the cooktop
surface works.
The fans keep running for a few
minutes after the unit has been
switched off.
The top of the unit is always
warm (even when it is switched
off).
The cooktop surface makes a
faint clicking noise when in
operation.
The unit doesn't work at all.
After turning an element ON
and having cookware placed
on the burner, there is no heat
and the digital indicator conti-
nues to flash.
Cookware makes noise during
cooking.
The cooktop surface gives off
a smell when first used for
cooking.
Servicing of an induction unit needs to be done by an authorized service agent.
Contact your dealer for the service location closest to your residence.
If any crack on the glass top is noticed or the glass is broken DO NOT USE
THE UNIT. Disconnect the electrical supply to the unit by tripping the breaker off
(if the unit is hard-wired to the supply or just unplug the unit (if there is a plug
check the following points.
POSIBLE CAUSE
Your unit may be connected
incorrectly or there is an internal
problem.
There is an internal problem
with the unit.
The electronics are cooling
down.
The electronic components are
under power and they create
heat.
The noise occurs when the
power is being shared between
two induction burners.
There may be a power supply or
internal problem.
The cookware you are trying to
use is not compatible with
induction cooking or its
diameter is under 4"
Your cookware creates noise
from vibrations caused by
induced current.
It's a new unit.
Never try servicing the unit yourself.
on the supply cable).
17
WHAT SHOULD YOU DO?
Have the connection checked
first, if OK contact your service
agent.
Contact your service agent.
This is a normal occurrence.
This is a normal occurrence.
This is a normal occurrence.
Check your breakers, fuses,
connection cable. If OK contact
your service agent.
Use cookware suitable for
induction cooking.
Under high power this pheno-
menon is normal with some
types of pots and pans. There is
no damage for the cooktop.
Use each heating element for
an hour with a pan filled ith
water.
9963 7683 02/06