After-Sale Service; Installation - Fagor FIS-225 Manual

X If the freezer does not work correctly even after
8 .
you have consulted the trouble shooting guide,
contact after sales Service.
X
Do not install the appliance close to any heat source.
9 .
High room temperatures, direct sunlight, or location near
heating or stoves increase the power consumtion and shoul
be avoided. If it is not possible to avoid placing the appliance
next to a source of heat, note that the following spacings
should be maintained:
to coal oil ovens or heaters 30 cm
to electric cookers/Hotplates 3 cm
The appliance must be placed in a dry and well-ventilated
x
room.
Clean the interior (see "DEFROSTING AND CLEANING THE
x
APPLIANCE").
Assemble the accessories.
x
Check the efficiency of the door seal, especially after the
x
appliance has been built in and the door opening direction
has been changed.
Electrical connection
Check that the voltage shown on the rating plate corresponds
x
to the voltage in your home.
The appliance must be earthed in accordance with the law.
x
The Manufacturer cannot be held liable for any injury to
persons or damage to property resulting from the failure to
comply with this requirement.
If the appliance plug and the wall socket are incompatible, the
x
socket must be replaced by a qualified electrician.
Do not use adapters, multiple sockets or extension cables.
x
20

AFTER-SALE SERVICE

INSTALLATION

X
8
X
9