English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome or via the app. Important safety information Only use the product for its intended purpose. Read...
Page 41
- Unplug the appliance before cleaning it with water. - Do not use a damaged appliance. Replace damaged parts with new Philips parts. - Only use cold or lukewarm water to clean the appliance. - Because of hygiene, only one person should use the appliance.
Page 42
Consult your phycisian for advice and keep the appliance at least 20 cm away. - Only use original Philips accessories or consumables. Only use detachable supply unit HQ8505. - Charge, use and store the product at a temperature between 5 °C and 35 °C.
Page 43
- Keep out of reach of children. - Do not swallow. - In case of eye contact, rinse with plenty of water. Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Radio Equipment Directive - S9000 series appliances are equipped with Bluetooth class 2.
Socket for small plug Charging stand Supply unit 10 Small plug 11 Pouch 12 Philips Quick Clean Pod Cartridge 13 Quick Clean Pod 14 Cleaning brush 15 Length settings 16 Click-on beard styler attachment 17 Comb for beard styler attachment Note: The accessories supplied may vary for different products.
Page 45
English The display shows that your shaver is not paired to your smartphone (see 'Pair the shaver and smartphone'). The display shows that your shaver is paired to your smartphone (see 'Pair the shaver and smartphone'). Switching the shaver on Press the on/off button to switch on the shaver.
Page 46
English Cleaning the shaver Icon Meaning A reminder: clean your shaver in the quick cleaning pod (see 'How do I use the Quick Clean Pod?'). A reminder: clean your shaver. The cleaning process is in progress and the display shows the remaining cleaning time as a clock, or in seconds, if you press the menu button.
Page 47
English - When you apply too much pressure, the light ring lights up orange. When your shaver is switched on, you can customize the type of pressure feedback you receive. 1 Switch on the shaver. 2 Press the menu button to toggle through the pressure feedback options.
Page 48
English When your shaver is switched off Main menu While your shaver is switched off, you can also toggle through the four menu functions by pressing the menu button. - Remaining battery charge This menu item shows the remaining battery charge.
Page 49
English - Bluetooth From this menu item, you can unpair your shaver and smartphone. For information about the benefits of pairing your shaver and smartphone, see 'Benefits of connecting your shaver to the app'. Note: Make sure your smartphone is equipped with ®...
Page 50
English - The pressure you applied during the shave was too low. Motion Control sensor feedback - When your shaving motion can be improved, the Motion Control sensor icon displays with an exclamation mark. Perfect Routine feedback - When both the pressure and the motion applied during the shave is perfect, the Perfect Routine icon displays with a check mark.
English Note: You cannot use the appliance while it is charging. Charging with the supply unit 1 Make sure that the appliance is switched off. 2 Insert the small plug into the appliance and put the supply unit in the wall socket. - While the appliance is charging, an animation appears on the display showing the progress.
Page 52
English How do I use my appliance and the attachments? Warning: Always check the appliance and all accessories before use. Do not use the appliance or any accessory if it is damaged, as this may cause injury. Always replace a damaged part with one of the original type.
Page 53
English 3 Use the narrow sides of the shaving unit to shave in hard-to-reach areas such as along your jawline and under your nose. 4 Switch off and clean the appliance after each use. Note: Make sure you rinse all foam or shaving gel off the appliance.
English Skin adaptation period Your first shaves may not bring you the result you expect and your skin may even become slightly irritated. This is normal. Your skin needs time to adapt to any new shaving system. Follow the advice provided by the app and shave regularly (at least 3 times a week) with this shaver for a period of 3-4 weeks to allow your skin to adapt to the new shaver.
English 4 You can also use the trimmer under your nose. 5 Switch off the appliance and clean the trimmer after each use to prevent clogging and damage (see 'How do I clean my appliance and the attachments?'). 6 Close the trimmer. Using the click-on attachments Note: The accessories supplied may vary for different products.
Page 56
English 3 Press the length selector and then push it to the left or right to select the desired hair length setting. 4 Switch on the appliance. 5 Move the appliance upwards while you exert gentle pressure. Make sure the front of the comb is in full contact with the skin.
Page 57
English stand (if supplied) or in the Philips Quick Clean Pod (if supplied). How do I clean my appliance and the attachments? How do I use the Quick Clean Pod? What does the icon on my Quick Clean Pod mean?
Page 58
English 4 Press the small circular piece on the handle of the Quick Clean Pod Cartridge to break the snap hook on the handle. 5 Place the Quick Clean Pod Cartridge into the Quick Clean Pod. 6 Put the top of the Quick Clean Pod back onto the base and turn it clockwise until you hear a click.
Page 59
English 3 Let the shaver air-dry completely in the Quick Clean Pod before storing it. Replacing the Quick Clean Pod Cartridge Replace the Quick Clean Pod Cartridge immediately when the cartridge replacement icon on the Quick Clean Pod becomes visible or follow the table below. Frequency of use Cycles When to replace...
4 Place a new Quick Clean Pod Cartridge into the Quick Clean Pod. Scan the QR code to the left or visit www.philips.com/cleaning-cartridge to order replacement Quick Clean Pod Cartridges. Clean the appliance and the attachments after each use for optimal performance.
English 5 Rinse the shaving head holder under a warm tap. 6 Carefully shake off excess water and let the shaving head holder air-dry completely. 7 Close the shaving unit. Thorough cleaning We advise you to clean the shaving heads thoroughly once a month or when the shaver does not shave as well as it used to.
Page 62
English 5 Clean the cutter and guard under the tap. 6 Shake off excess water. 7 Put the shaving heads back into the shaving unit. For detailed instructions, see 'How do I replace the shaving heads?'. 8 Insert the hinge of the shaving head holder into the slot in the top of the shaving unit and close the shaving unit.
English Cleaning the click-on attachments Never dry the trimmer or beard styler attachments with a towel or tissue, as this may damage the trimming teeth. The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your product.
Page 64
- Recommendations on style - Customization of post-shave feedback - Personalized advice Pair the shaver and smartphone The app is compatible with a wide range of iPhone and Android™ smartphones. More information is available at www.philips.com/MyShaver9000-app 1 Download the app.
Page 65
English 2 Make sure Bluetooth on your smartphone is switched on. S7920 3 Switch on the shaver to activate Bluetooth. 4 Open the app and follow the instructions to start the pairing process. 5 Once paired, the shaver and app connect automatically when the app is open and Bluetooth on your phone is switched on.
Page 66
English Unpair the shaver and smartphone You can pair your shaver with only one smartphone at a time. To unpair your shaver from your smartphone (e.g. when you get a new smartphone), follow these steps: Unpair the shaver 1 Toggle through the menu items by pressing the menu button until you reach the Bluetooth menu (the fourth menu).
English Always replace the shaving heads with original Philips shaving heads. Replacing the shaving heads 1 Switch off the shaver. 2 Press the release button on the shaving unit and pull the shaving head holder off the shaving unit. 3 Turn the retaining rings anticlockwise and remove them.
Ordering accessories To buy accessories or spare parts, visit www.philips.com/parts-and-accessories or go to your Philips dealer. You can also contact the Philips Consumer Care Center in your country. The following accessories and spare parts are available: - SH91 Philips shaving heads...
Page 69
English Shaver Problem Possible cause Solution I cannot connect You have not Download the app. the shaver. downloaded the app. Your shaver and Pair your shaver and smartphone are smartphone following the not paired yet. instructions in the app. The first pairing Unpair your shaver and attempt failed.
Page 70
English Problem Possible cause Solution I want to use the You do not have to connect shaver without your shaver to your the app. smartphone before each shave. The shaver works fine without the app, although you will not experience the same benefits. To get personalized shaving tips, just make sure that you connect it at least once every...
Page 71
Philips Quick Clean Pod Problem Possible cause Solution My shaver isn't clean You removed the Leave the shaver...
Page 72
The shaver battery is Charge the shaver empty. before using the Philips Quick Clean Pod. My Philips Quick Clean You regularly use the Shake off excess Pod is overflowing. Philips Quick Clean water after rinsing the Pod after rinsing the...
Page 73
English Removal of built-in rechargeable battery The built-in rechargeable battery must only be removed by a qualified professional when the appliance is discarded. Before removing the battery, make sure that the appliance is disconnected from the wall socket and that the battery is completely empty.
Page 74
English 3 Insert a flat-head screwdriver in between the front panel and the trimmer and tilt until the front panel is released. Bend the front panel forward. 4 Insert a flat-head screwdriver in between the power unit and backshell to release the snap connections.
Page 75
Android is a trademark of Google LLC Google Play and the Google Play logo are trademarks of Google LLC. ® The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Philips Personal Care is under license.
Need help?
Do you have a question about the S9987/59 and is the answer not in the manual?
Questions and answers