SPL HPm Manual page 7

Handling
Operate the controls and switches only as
described in the manual. Incorrect adjustments
outside safe para meters can lead to damage.
Never use excessive force on the switches or
controls.
Do not insert your fingers or hands in any gaps or
openings of the device.
Avoid inserting or dropping foreign objects (paper,
plastic, metal, etc.) into any gaps or openings of
the device. If this happens, power down immedi-
ately and unplug the power cord from the mains
socket outlet. Then have the device inspected by a
qualified professional.
Do not expose the device to excessive dust or
vibrations or extreme cold or heat (such as direct
sunlight, near a heater or in a car during the day)
to prevent the possibility of causing damage to
the housing, the internal components or unstable
operation.
If the ambient temperature of the device suddenly
changes, condensation can occur (if for example
the device is relocated or is affected by a heater or
air conditioning).
Using the device while condensation is present
may result in malfunction. Do not power on the
device for a few hours until the condensation is
gone. Only then it is safe to power on.
Cleaning
Disconnect the device from your mains socket
outlet before cleaning.
Do not use any solvents, as these can damage the
chassis finish. Use a dry cloth, if necessary, with an
acid-free cleaning oil.
Disclaimer
The company names and product names in this
manual are the trademarks or registered trade-
marks of their respective companies.
SPL and the SPL Logo are registered trademarks of
SPL electronics GmbH.
SPL cannot be held responsible for damage
caused by improper use or modification of the
device or data that is lost or destroyed.
HPm – 500 Series
Notes on Environmental Protection
At the end of its operating life, this
product must not be disposed with
regular household waste but must be
returned to a collection point for the
recycling of electrical and electronic
equipment.
The wheelie bin symbol on the product, user
manual and packaging indicates that.
For proper treatment, recovery and recycling of
old products, please take them to applicable
collection points in accordance with your national
legislation and the Directives 2012/19/EU.
The materials can be reused in accordance with
their markings. Through reuse, recycling of raw
materials, or other forms of recycling of old prod-
ucts, you are making an important contribution to
the protection of our environment.
Your local administrative office can advise you of
the responsible waste disposal point.
This directive only applies to countries inside the
EU. If you wish to discard devices outside the EU,
please contact your local authorities or dealer and
ask for the correct method of disposal.
WEEE-Reg-No.: 973 349 88
EN
DE
7