■ If operating a power tool in a damp location is IMPORTANT! unavoidable, use a residual current device (RCD) It is essential that you read the instructions in this manual protected supply. Use of an RCD reduces the risk of before assembling, operating, and maintaining the electric shock.
■ Maintain power tools and accessories. Check for CORDLESS HEDGE TRIMMER SAFETY misalignment or binding of moving parts, breakage WARNINGS of parts and any other condition that may affect the power tool’s operation. If damaged, have the power ■ Do not use the hedge trimmer in bad weather tool repaired before use.
■ Turn off the product, and remove the battery pack. Allow TRANSPORTING LITHIUM BATTERIES both to cool down. Make sure that all moving parts have Transport the battery in accordance with local and national come to a complete stop: provisions and regulations. ●...
To prevent serious injury, do not touch the cutting blades. Always hold the product with both hands when operating. Remove the battery pack before starting any work on the product. Beware of thrown or flying objects. Keep all bystanders, especially children and pets, at least 15 m away from the operating area.
Page 6
R36HTR10 Blade guard Front handle Front trigger Rear on/off trigger Rear handle Blade HEDGESWEEP debris sweeper Blade cover Operator's manual Battery pack Charger Know your product...
Page 7
Always wear eye protection, ear WARNING: Keep hands away from the Slide HEDGESWEEP debris protection, head protection, and non- blades at all times. sweeper over the blade. slip, heavy-duty gloves while operating the product. Remove the blade cover from the Install the battery pack.
Page 8
p.xxx p.xxx p.xxx p.xxx Title header Title header Title header Title header Operating the product Title header p.xxx Cleaning the p.11 product Storing the product p.12 Title header Title header Title header Title header p.xxx p.xxx p.xxx p.xxx...
OPERATING THE PRODUCT CAUTION: Always use two hands to operate the product, which is fitted with two handles. WARNING: Keep hands away from the blades at all times. 1. Slide the HEDGESWEEP debris sweeper over the blade. Remove the blade cover from the blade.
Page 10
4. Use the product for cutting in a slow, sweeping action from side to side. NOTE: The product stops when the front trigger and the rear on/off trigger are released. Operation...
CLEANING THE PRODUCT 1. Press the latch on the battery pack and remove it from the product. 2. Slide the HEDGESWEEP debris sweeper off the blade. 3. After each use, clean the body and handles of the product with a soft, dry cloth and a stiff brush.
STORING THE PRODUCT 1. Press the latch on the battery pack and remove it from the product. 2. Slide the HEDGESWEEP debris sweeper over the blade. 3. Cover the blade with the blade cover. 4. Store the product in a cool, dry, and well- ventilated area that is inaccessible to children and well away from sources of ignition.
Cordless hedge trimmer standardised test and may be used to compare one tool with Model R36HTR10 another. They may be used for a preliminary assessment of exposure. Rated voltage 36 V d.c.
Page 16
Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. HEDGESWEEP is a trade mark of Techtronic Outdoor Products Technology Limited. 961087667-01...
Need help?
Do you have a question about the R36HTR10 and is the answer not in the manual?
Questions and answers