•
Operators must pay attention to the risk of clothing and/or long hair getting caught and entangled in
moving parts; the use of hair caps is recommended.
•
It is strictly forbidden to discharge production products or waste or any polluting substances into
streams and rivers, on the ground and in the environment. These products or substances must be
collected in special containers, stored or recycled and in any case not released in the environment.
During machine operation, make sure that no unauthorised persons incautiously approach it or the
controls.
•
Unauthorised persons must not be allowed to approach the operating machine (even if stopped).
•
If third parties (unauthorised persons or colleagues) are present near the machine, the operator must
supervise their safety and warn them of the dangers.
•
Do not leave the machine on and unattended during work breaks (even if idle). Failure to comply with
this provision may be cause of serious accidents.
•
Before intervening on the machine, make sure that it is stopped and that the ignition key has been
removed from the tractor.
•
Do not use machine parts that are separated from the unit or from the configuration envisaged by the
manufacturer.
•
When the machine emits a noise above 85 decibels for 8 hours, according to local regulations in
force, ear protectors or earplugs must be used.
•
Only allow the machine to be used by authorised personnel, adequately trained, over the age of 18
and with a driving licence.
•
Do not reverse the machine while operating it.
•
Make sure that the machine is stable and check the slope of the ground on which to operate.
•
Do not use the machine if faulty, even if it is only suspected; also notify your nearest dealer or the
technical customer service of ALPEGO directly of any found irregularities and request intervention.
•
Do not use the machine in an altered psycho-physical state, under the influence of alcohol or medicines
such as sleeping pills, tranquillisers, stimulants, drugs or any other legal or illegal substance that may,
in some way, slow down or alter your sensory perceptions, reflexes or eyesight. In case of impact
against an obstacle, stop the machine and check the extent of the damage. In case of damage, even
minor, make the necessary repairs before continuing.
•
Pay attention to the state of wear of hydraulic hoses (if any): replace them if damaged. In any case,
they must be replaced at least every 5 years, or check the expiry date (in some cases) printed on the
pipe itself.
•
Check that the protections, guards and all safety devices are in place and in good condition and
efficient.
•
Pay attention to slippery ground surrounding the machine; furthermore, do not approach ditches or
channels in order to avoid possible tipping of the machine.
•
Do not use machine parts as grips as they are not safe anchoring elements. Furthermore, an
involuntary movement of a command could cause the operating machine to move unexpectedly.
•
Do not park the machine on steep slopes or on unstable ground.
•
Repair or replace any broken parts, always and only if the interventions are indicated in the instruction
Strictly confidential information - All rights to the contents of this document are reserved. It is forbidden to copy, use, distribute, even partially or
otherwise disclose such information, unless expressly authorised by "ALPEGO S.p.a.". Violations will be prosecuted in accordance with the law.
18
Codice : Q00A00191 - Rev. 04_12/2022
Need help?
Do you have a question about the AGILE and is the answer not in the manual?