Aiwa XR-H33MD Operating Instructions Manual page 19

3,7
5
4,5
44. -
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
1
2
3
4
5
Insert the tape i!nto deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit,
Press CD and load the CD(s),
Press EDIT/CHECK twice on the remote control
while pressing SHIFT.
"PRGM" lights up.
When "Al" is displayed, press EDIT/CHECK while pressing
SHIFT again,
Press numbered buttons O-9 on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
Maximum recording
time for side A
Press DISC DIRECT PLAY 1-3 to selecl, a CD.
Then, press numbered buttons O-9 and +1 O to
program a track.
6
7
8
Repeat step 5 for the rest of the tracks for side A. Cl
A track whose playing time is longer than the remaining time
z
Selected Program
track number
number
Remaining time -
of side A
Press EDIT/Cl-lECK on the remote control while
pressing SHIFT to select side B and program the
tracks for side B.
After confirming B on the display, repeat step 5.
Maximum recording
time for side B
Tape side B
Press TAPE REC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, tie
lead segment is played through for 10 seconds, and recording
starts. When recc)rding on the front (side A) ends, recording
on the back (side B) starts.
To stop recording
Press CLEAR. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press EDIT/CHECK on the remote control while
pressing SHIFT to select side A or B, and press ~ or >
repeatedly.
Programmed
Program number tracks
Tape side Track number
To change the program of each side
Press EDIT/CHECK on the remote controlwhile pressing SHIFT
to select side A or B, and press CLEAR to clear the program
of the selected side. Then program tracks again.
To clear the edit program
Press CLEAR once in stop mode to return to the normal
display.
ENGLISH 18