Aiwa XR-H33MD Operating Instructions Manual page 10

2
1
++, >
II
ENTER
MODE
'EJECT='EJECT
On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
Use Type I (normal) tapes only.
7 Press TAPE and press 4 EJECT to open the
cassette holder.
A EJECT
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press 4> to start play.
The tape counter indicates
Playback side indicator
the tape running length.
To select a reverse mode (deck 2 only)
1 Press MODE once.
"DECK 2 MODE?" is displayed.
2 Within 10 seconds, press ENTER, then turn MULTI JOG to
select the reverse mode.
~=+=)+<=)
To play one side only, select "Z".
To play from front side to reverse side once only, select "Z)".
To play both sides repeatedly, select "C=)".
When tapes are loaded in both decks, "Z)" on the display
indicates Continuous Play.
3 Within 10 seconds, press ENTER again.
When tapes are loaded in both decks
Press TAPE first to select a deck.
The selected deck number is displayed.
To stop play, press 9.
To pause play (deck 2 only), press 11. To resume play, press
again.
To-change the playback side, press + F DIR/PRESET in play
or pause mode.
To fast forward or rewind, press ++ or >. Then press
to stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE. The power is turned on and play of the inserted
tape begins.
To set the tape counter to 0000
Press CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
Playing deck number
>: The front side is being played (forward).
4: The back side is being played (reverse),
9
ENGLISH