Adaptec VideOh! DVD AVC-2200 Getting Started page 6

3
Connect your video device to your AVC-2200 using the
included A/V cable. Your device may have a proprietary cable.
4
Connect the AVC-2200 to your computer using the provided
USB cable.
When you connect the powered up AVC-2200 to your computer,
Windows detects it and starts the Found New Hardware
wizard. This wizard steps you through the process of installing
the necessary driver.
5
Follow the on-screen instructions.
If you are using Windows 98SE, you may need your
I
Windows 98SE CD to complete the installation.
If you are using Windows XP and you have plugged your
I
device into a USB 1.1 port, you will see a message indicating
that a high-speed USB device is plugged into a non-high-
speed USB port. This means your AVC-2200 will run at the
slower USB 1.1 speed. To increase your speed you may want
to upgrade to USB 2.0. Go to
more information on USB 2.0 adapters.
If you are using Windows XP, you may see a warning
I
message about Microsoft Windows logo certification. Click
Continue Anyway.
www.adaptec-europe.com
3
Connect white audio
plug to white audio port
and red audio plug to
red audio port
Connect yellow video
plug to yellow video
input port
for