Advertisement
Quick Links
TOT Kiosk
Quick Start Guide
Part# 15501-GA0xx
(With or without Betslip Reader)
TOT Kiosk with Betslip Reader (GA010 and GA011)
TOT Kiosk without Betslip Reader (GA012)
NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173
Telephone 03 9701 1511
www.neoproductsgroup.com
15501-ML002 Rev01_ECN 6113_BETMAKERS QUICK START GUIDE
Page 1 of 11
Advertisement
Related Manuals for NEO 15501-GA0 Series
Summary of Contents for NEO 15501-GA0 Series
- Page 1 TOT Kiosk Quick Start Guide Part# 15501-GA0xx (With or without Betslip Reader) TOT Kiosk with Betslip Reader (GA010 and GA011) TOT Kiosk without Betslip Reader (GA012) NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15501-ML002 Rev01_ECN 6113_BETMAKERS QUICK START GUIDE...
-
Page 2: Component Descriptions
TOT Kiosk Component Descriptions 15.6” LCD Screen 7” LCD Screen Magswipe NFC (side) Scanner Betslip Reader (for GA010 and GA011 only) Base Printer Lock Slide Printer Lock Plate NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15501-ML002 Rev01_ECN 6113_BETMAKERS QUICK START GUIDE... - Page 3 TOT Kiosk Component Descriptions Printer Paper Roll Lid Printer Power Printer Paper advance button Printer Latch Slide Printer Lock Plate locating tabs NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15501-ML002 Rev01_ECN 6113_BETMAKERS QUICK START GUIDE...
- Page 4 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Unpacking TOT Kiosk and Printer ATTENTION: Prior to installation, refer to Chapter 1 – Safety Information in the Betmakers User Service Manual.
- Page 5 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Unpacking TOT Kiosk and Printer (continued) For this installation example, the Modular Printer Assembly will be shown mounted onto the LH side of the Kiosk.
- Page 6 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the TOT Kiosk (continued) Open the Kiosk Back Cable Door to access Power, Fuse and Network. Plug the Power lead into position shown. Plug in the Network cable into the “ETHERNET”...
- Page 7 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the TOT Kiosk (continued) Push the Printer Data Plug into the Rear Switch Plate in position shown. Push in the Printer Power plug into the Rear Switch Plate in position shown.
- Page 8 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Loading Printer Paper From the operator side, push the 7” LCD Screen downwards to a full stop position. Holding the bottom of the 15.6” LCD Screen, tilt in an upwards direction to a full stop position.
- Page 9 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Printer Paper Feed After the Paper Roll has been replaced, the Paper Roll can be feed into the Printer by pushing the Printer Paper advance button.
- Page 10 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Clearing Paper from Printer (continued) Lift the Printer Head using the "RELEASE" tab on the Printer assembly. Close the Printer Head by pushing down waiting for a “click”...
- Page 11 QUICK START GUIDE CAUTION: Servicing of this product or unit is to be performed by trained service personnel only. Swipe Card Payment and NFC Reader The Swipe Card Payment and NFC Reader are located on the RH Side of the 15.6” Teller LCD Screen. NFC Reader Swipe Card payment Swipe Card Payment and NFC Reader...
Need help?
Do you have a question about the 15501-GA0 Series and is the answer not in the manual?
Questions and answers