Advertisement
Quick Links
Entain Kiosk
Quick Start Guide
Part# 15502-GA0xx
NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173
Telephone 03 9701 1511
www.neoproductsgroup.com
15502-ML002 Rev02_ECN 6539_ENTAIN QUICK START GUIDE
Page 1 of 8
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for NEO Entain
Summary of Contents for NEO Entain
- Page 1 Entain Kiosk Quick Start Guide Part# 15502-GA0xx NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15502-ML002 Rev02_ECN 6539_ENTAIN QUICK START GUIDE Page 1 of 8...
-
Page 2: Component Descriptions
Entain Kiosk Component Descriptions 15.6” LCD Screen Magswipe Printer NeoProducts Pty Ltd ACN 007 152 374 ABN 76 007 152 374, 62-66 Pacific Drive, Keysborough, Vic, 3173 Telephone 03 9701 1511 www.neoproductsgroup.com 15502-ML002 Rev02_ECN 6539_ENTAIN QUICK START GUIDE Page 2 of 8... - Page 3 Unpacking Entain Kiosk ATTENTION: Prior to installation, refer to Chapter 1 – Safety Information in the Entain User Service Manual. Remove the strapping from the carton. CAUTION: The strapping is under tension and can flick when cut.
- Page 4 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the Entain Kiosk Power, Fuse and Network are accessed from the rear of the Kiosk. The Kiosk is intended to be used in a location having...
- Page 5 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the Entain Kiosk (continued) Switch unit from O → I in position shown. Close the Back Cable Door. Loading Printer Paper The Printer is installed into the Kiosk in position shown.
- Page 6 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Loading Printer Paper (continued) Push the grey lever in a downwards direction until stop is reached to disengage the Printer Head. The Printer Head will open towards the operator to expose the Printer internals.
- Page 7 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Loading Printer Paper (continued) Manually feed the Paper Roll towards the opening of the Printer to engage into the Printer Head when closing.
- Page 8 CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Swipe Card Payment The Swipe Card Payment is located on the RH Side of the 15.6” LCD Screen. Swipe Card payment 15502-ML002 Rev02_ECN 6539_ENTAIN QUICK START GUIDE Page 8 of 8...
Need help?
Do you have a question about the Entain and is the answer not in the manual?
Questions and answers