Page 2
CAUTION: THE QUICK START GUIDE FOR THE SET-UP OF THE CARD PRINTER KIOSK REQUIRES THE AID OF MACHINERY. QUICK START GUIDE STEPS REQUIRING MACHINERY, WILL BE IDENTIFIED BY THE FOLLOWING SYMBOL: WHERE PRACTICABLE, CONSIDER SAFE MANUAL HANDLING PRACTICES TO AVOID INJURY. CONDUCT A RISK ASSESSMENT PRIOR TO STARTING ACTIVITY.
Page 5
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Unpacking Card Printer Kiosk ATTENTION: Prior to installation, refer to Chapter 1 – Safety Information in the Circle Solutions User Service Manual. Remove the strapping from the carton.
Page 6
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Unpacking Card Printer Kiosk (continued) Pull the Card Printer Door Handle from bottom outwards & rotate clockwise to release from Kiosk. Reaching into the Card Printer Kiosk, remove &...
Page 7
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Unpacking Card Printer Kiosk (continued) Remove & retain the Lower Fascia Door by lifting in an upwards direction to disengage from the Kiosk. Open the Registration Kiosk Lower Door using the key provided.
Page 8
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Unpacking Card Printer Kiosk (continued) THE REMOVAL OF THE CARD PRINTER KIOSK FROM THE PALLET REQUIRES A FORKLIFT OR SIMILAR. DO NOT ATTEMPT TO REMOVE WITHOUT APPROPRIATE LIFTING EQUIPMENT.
Page 9
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Power up the Kiosk Power, Fuse and Network are accessed from the rear of the Kiosk. The Kiosk is intended to be used in a location having equipotential bonding (such as a restricted access area) and is connected to power using an earthed IEC cable supplied.
Page 10
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Smart-70 Printer information decals To guide the user, the following Decals are applied to the inside of the Card Printer Door. CARD PRINTER FILM REPLACEMENT CARD FLIPPER BIN EMPTYING.
Page 11
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Opening the Kiosk to access the Smart-70 Printer Open the Card Printer Door using key provided & unlock using the handle. Push the 2x blue levers downwards to release the Smart-70 Printer from the Slide.
Page 12
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Opening the Kiosk to access the Smart-70 Printer (continued) Push the Slide Rail safety lock downwards to release the Smart-70 Printer. Follow the Steps in reverse to return the unit to the home position.
Page 13
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Adjusting Camera alignment position (continued) Remove & retain 4x Screws fastening the Camera rear cover from the LCD Screen (2x each side & 2x rear).
Page 14
CAUTION: Servicing of this product or unit is to QUICK START GUIDE be performed by trained service personnel only. Smart-70 – User Manual For further information, refer to the Smart-70 User Manual for full instructions on Installation & Operation. IDP-Smart-70-User-Guide 17401-ML002 Rev02_ECN 6604_CIRCLE CARD PRINTER QUICK START GUIDE Page 14 of 14...
Need help?
Do you have a question about the 17401-GA0 Series and is the answer not in the manual?
Questions and answers